Fri Jan 23 2015

Films are not completely dry when the come out

The films are not completely dry when they come out,.  ... and have some scratches on them....comsistent with debris stuck to the rollers but machine was cleaned thoroughly so not sure where this coming from.

thank you

Cristina


   RE: Film Processor Report Post
Wed Feb 04 2015Reply from emorgan
avatar placemark

If the films are coming out slightly wet and the dryer is blowing warm air than you need to check the fixer. If the fixer is weak it  will not harden the emulsion on the film fast enough, resulting in tacky films. If the fixer is only weak in the processor the problem will usually go away as a result of replenishment if you are a medium to high volume usage facility.


Report Post
Tue Feb 10 2015Reply from ricardsc2
avatar placemark

You have a problem with the fixer,sure......load the tank with new fixer and check.......

ricard


Report Post
Tue Feb 10 2015Reply from ricardsc2
avatar placemark

You have a problem with the fixer,sure......load the tank with new fixer and check.......

ricard


Report Post

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Please review our Privacy Policy for more details.
I Agree