need to confirm from transistor lable

I need the same info (Q2) as well as Diode ZD2.

TKS

yes we need someone have this board and he can show it and inform us .... Q2 is transistor 3 pins

What is the part number on the power supply chassis? Which board are you talking about?  The power supply for the 8000 SE has three circuit boards inside the chassis.  One in the center, one next to the fuse holder and a black cage behind the one next to the fuse holders.

Q1 same as Q2 on PA6000 which is the unit in the black cage
IRFP450
ZD2
1N4747

Do you need the schematic?

Thank you "Oahu Medical Equipment Repair"

yes please ... I talk about board in the boards cage, behind the probs connection, in this cage you see from left to right (power - pcc - DSC - BF0 - CW), the board which i talk about it is first on from left (power) and the burn element is Q2 . if you get me your email i can send the photos

the Q2 is transistor 3 bins, i didin`t find Q1 in this board

Now I understand the power supply you’re talking about.  The version that plugs into the card cage next to the CPU board left of the CPU facing the front and not the AY-336-power-XX power unit I was trying to refer to.

Unfortunately, the Medison version you’re talking about is not well documented at the card level and the revisions are too numerous and complicated.

At the least I need the machine Model number and serial number to start. The circuit board manufactures part number and revision number is printed on the circuit board.

If you can't send the above information I'm not sure I can help. 

Thanks  OMER

THANK YOU for your supporting

SA8000SE-GER
SN: A5B506300000310
power supply manufucture DAEAN ELECOM CO.´LTD power supply model DMPS 3405  

BOARD SN 0517330

best regards

What is your email?

It's either one the following part numbers;

AY-340-PWR-ADM-00 SEBY POWER AY AC-DC MODULE
AY-340-PWR-DDM-00 SEBY POWER AY DC-DC MODULE

I will need pics and I don't have the schematics on hand for either.  The US models use a different power supply unit.  I can probably get the schematics if you send detailed pics of the damaged part area and the part numbers printed on the PCB. My e-mail is on my web site.

http://oahumedicalequipmentrepair.com/

Power Supply is DEAN ELECOM Model DMPS 3405