Wed Jan 18 2017

OEM vs after market

Years back I was replacing 300 W xenon lamps with aftermarket lamps , never had a problem . Somehow I find myself now only using OEM lampd at average cost of $1200.00 vs $ 350.00 for aftermarket . I would like to hear opinions from other technicians aftermarket vs OEM regarding 300 watt xenon lamps

   RE: Light Source Report Post
Wed Jan 18 2017Reply from AJ_Diaz
avatar placemark

For the most part, we always use after market Xenon Lamps. We buy ours from Cadmet. The only OEM we buy from is for our Smith & Nephew devices. Theirs is very specific. The other light sources we have here have a reset function that resets the timer.


Report Post
Wed Jan 18 2017Reply from MedWrench MM
MedWrench MM

Who is the manufacturer for the 300 W Xenon Lamps?


Jonathan F. Payne,
Media Manager @ MedWrench,
866-989-7057,
Jpayne@MedWrench.com
Report Post
Wed Jan 18 2017Reply from JFC
JFC

We experienced the thrill of cost saving with aftermarket product until we experienced the negative results and cost and labor of having to replace power supplies driving such lamps.  Aftermarket products were drawing heavier current flow which was puttig a stress on the OEM designed for lamps.


Report Post
Thu Jan 19 2017Reply from M. Brinson
avatar placemark

The largest manufacturer in the world for the OEM is Excelitas Technologies™.  I am a representative for Atlas Specialty Lighting® and we are the largest authorized distributor in the world for the Cermax® division of Excelitas Technologies™ and have been for over 30 years. 


Report Post
Thu Jan 19 2017Reply from M. Brinson
avatar placemark

If you ever need a xenon power supply make sure to give us a call first.  There are quite of few OEM power supplies that carry a have price tag.  We have access to a number of different OEM power supplies.

Matt Brinson

matt@asltg2.com

813-238-6481 x: 4231


Report Post
Fri Jan 20 2017Reply from MedWrenchManager
MedWrenchManager

 I use aftermarket on my Olympus light sources and have never had any complaints. And they have lasted through the full hours.

Originally posted by Linda J., Biomedical Equipment Technician at Womack Army Medical Center, via Facebook.


Report Post
Sun Jan 22 2017Reply from Lee Ann Purtell
Lee Ann Purtell

I personally have purchased both OEM and aftermarket bulbs with varying degrees of sucess.  One thing I found was that it difficult to compare the actual light output of the 2 units while measuring the life of the bulb was easier.  If you want to validate and measure the OEM versus aftermarket lamps you can do so with an EndoLume light meter.  This devices quantitatively measure the light output (in lumens) on devices such the light sources you are refering to here and also will measure light cords and rigid and flexible scopes.  The meter comes with a full set of OEM adaptors to fit Storz, Wolf, Olympus, Stryker, ACMI and other common brands of devices. If you would be interested in any additional information please contact me and I can help you or put you in touch with a distributor in your area. 

Lee Ann Purtell - Capital Medical Resources

614.657.7780 or leeann@capitalmedicalresources.com

https://www.bing.com/videos/search?q=endolume+light+meter+video&view=detail&mid=1D3104A14343AA8CB84A1D3104A14343AA8CB84A&FORM=VIRE


 
Lee Ann Purtell
Capital Medical Resources LLC
614-389-1334 office
614-657-7780 mobile
614-467-3923 fax
leeann.purtell@capitalmedicalresources.com

Report Post

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Please review our Privacy Policy for more details.
I Agree