Thu Jan 19 2017

estimate annual repair cost

need to estimate annual repair cost for 100 model 8015 and 150 model 8100. Can't find any information. Also annual PM costs


   RE: Infusion Pump Report Post
Fri Jan 20 2017Reply from MedWrench MM
MedWrench MM

HI Ibby,

I would advise reaching out directly to our Infusion Pump sponsors for pricing. They are happy to help out when they can. 

J2S Medical

Infusion Pump Repair

Elite Biomedical Solutions

RepairMED

 

Just be sure to tell them you were referred by Jonathan at MedWrench.


Jonathan F. Payne,
Media Manager @ MedWrench,
866-989-7057,
Jpayne@MedWrench.com
Report Post
Tue Feb 19 2019Reply from Stan Skaggs
Stan Skaggs

if you are wanting to PM them yourself, you are looking at having to buy some soft-goods and some replacement parts too as well as time investment.

Due to the IUI recall issue, you need to replace both IUI connectors annually and you will need a calibrated test set for your 8100s which should last you half your heads.. so you will need 2 of those.  We replace batteries on the 8015 controllers every 2 years as well so might keep that in mind.  You will need the software to connect to the RJ-45 connector on the back of the 8015 pumps. I built my own connector instead of the one from Carefusion (BD) and utilize a CAT5 cable that I plug into the connector on my serial port so the wire can be as long as I need it to be.  I also have four USB to serial adaptors so I can operate 4 pump combinations at a time so I can have four pumps (LVP) running simultaneously (I loose track if more than 4.. LOL).

When you do the PMs it logs the actions and results in the PC so you need to export the report for your fleet to keep on hand if there are any questions.  Timewise, the controllers take just a few minutes with the most complicated portion being testing all the keys on the front and back... The pump head takes some time to do flow and occlusion testing.. should be all of 5 minutes though once you get rolling.


mrstan.
Report Post

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Please review our Privacy Policy for more details.
I Agree