Procedure of doing preset using a computer
presets
Do you have all of the equipment? I mean, laptop, cable, USB to serial adaptor, GXP program, etc?
Let me know all about, and I'll guide you. It's easier than you think...
Report Post
YES i HAVE ALL THE EQUIPMENT.pLEASE REMEMBER THE MACHINE IS AK200 I'M SURE THE PROCEDURE MIGHT BE THE SAME.PLEASE ASSIST SOONEST THANKS
Report Post
Sorry for the late reply;
Once you get into the menu (simultaneously pressing 3 keys beneath lcd, entering password, then go to PCPreset), you must connect the AK200S with the cable to the PC. Then you open the GXP, make sure the Machine type and Program version is OK, and press Online. It downloads the program from the AK-200S to the GXP, and then you can make changes, and reload it again to the machine.
Should you need detailed info and/or program ready, let me know your email to send you the exact procedure, and even make the program ready for you. I hope you can understand the reason for not writing all steps now.
Report Post
Thanks strigou,please send me the detailed info and program ready and the exact procedure since I need to set a degassing pressure of 480 and the range i have is 700 high and low of 500,need also to disable UFD,and alot others.In short I need the AK 200 tobe operated as AK96 or AK 95 that is connect the bicart, acid concentrate,bloodlines then continue to dialyse.For disinfection no central disinfection.just like that.The program version is 10.12,and 9.20 currently.other 7 machines are also to come and am not sure of their prog.versions.email address is phillemon_nyandira@yahoo.com.
Maybe last question is it possible to update and make the machines at one program version? Sorry for the long email
Will highly appreciate
Report Post