message low battery. What kind of battery and where is it located
Thu Jan 30 2014
battery error
Thu Jan 30 2014Reply from Gantry
The MST assy is locate behind the right side panel if looking at the front of the machine.
If Battery Low” message is displayed on the monitor,replace the Battery on MST Assy.
1. Print out all user preset data for reference.
2. Remove MST Assy ,slot Number 4 from cardcage.
Refer to 6–2–18, PC BOARD(S) in chapter 6, RENEWAL PARTS for disassembly procedures.
3. Insert new Battery into empty Battery socket (BAT2) on the edge of MST Assy. Make sure that polarity is
correct (upside positive(+)).
4. Remove old Battery from socket (BAT1).
5. Check the user preset data.
CAUTION
If you do not replace Battery even if “Battery Low” message is displayed on the monitor,
SRAM data should be lost and reset to the factory default
MST ASSY 2185497–3 1 1 Version 1.2 software 6–2–18
2211942–5 1 1 Version 2.01 software 6–2–18
hope this helps. i will have medwrench add the service manual for reference.
Report Post
Fri Jan 31 2014Reply from efreeman
Tue Sep 26 2017Reply from mehmeth
thank Gantry
I changed battery but appear loqiq 200 on screen and do not complete starting
how starting
Report Post
Tue Jul 07 2020Reply from Spaceflight81
Today I also changed the battery like described above but now screen keeps black. Nothing ist working anymore. Is there a solution rather then buying a new one? Thx in advance.
Report Post
Wed Jul 08 2020Reply from Ben C
One of these companies may be able to assist:
Find me on Facebook, LinkedIn, YouTube or Twitter
Report Post
Wed Jul 08 2020Reply from Spaceflight81
Thank you very much for your reply. My problem is that I live in Germany. GE Germany wasn't interested to help me with the problem. Just told me to buy a new device!
Report Post
Tue Sep 28 2021Reply from Fahmad
I changed battery but appear loqiq CX 200 on screen and do not complete starting
how to solve this issue please contact me
Report Post
