Sysmex - XS-1000i
Sysmex XS-1000i Forums
Add Hematology Analyzer to My Bench28 Results
Added Nov 28 2022
0 RepliesI need servixe manuals for sysmex xp 500i also if it available
Equipment: Sysmex - XS-1000i
RE: Sysmex - XS-1000iAdded Sep 26 2022
0 Replieshi, we lost the hard disk with the system. could you help us with the software?
i've XS-1000i
Thanks RE: Sysmex - XS-1000i
Updated Jul 12 2022
1 ReplyWe have connected the Sysmex XS1000i to a local area network but when sample is run the output comes empty whiles lan cable is plug in. Any help? RE: Sysmex - XS-1000i
Added Jun 24 2019
0 RepliesAfter bleaching the WBC chamber, I still get the error after a few runs. Can you tell me where the WBC chamber filter is located so that I may check or replace it? RE: Sysmex - XS-1000i
Updated May 3 2018
Updated Dec 10 2017
1 ReplySeems toward the end of every month we start doing extra slides. If we started doing the monthly maintenance sooner (bleaching procedure), would this decrease the number of slides we perform? RE: Sysmex - XS-1000i
Updated Dec 6 2017
1 ReplyThe CBC Analyzer is connected to the IPU (ver 00-30 built 34) via a linksys USB 2.0 /Ethernet adapter.
IP address 192.168.1.125
Sub mask : 255.255.255.0
Gateway : 192.168.1.1.
DNS : 212.27.40.240 & 241
The IPU is also connected to a Linksys router via a broadcom ethernet adapter.
IP address 192.168.1.120
Sub mask : 255.255.255.0
Gateway : 192.168.1.1.
DNS : 212.27.40.240 & 241
The router is connected to a centralization PC (to launch the analysis)
How can I get the IP config of the analyzer. I tried ipconfig /all command on the IPU, but the pannel only shows the 2 ethernet adapter config installed on the IPU (both pings ok)
When I switch on the analyzer at request of the PC, the red led of the analyzer remains on red and there is no reaction from it ?
Does someone have an explanation for this ? RE: Sysmex - XS-1000i
Updated Sep 12 2017
1 ReplyWe are getting "DATA ERROR" dialog, after placed samples. For example, if we place 5 samples, results come for the first one, that time, the Data Error dialog appears on the screen of Sysmex system. Once we click on accept button its appear, again we are placing sample, its works then, until we are getting the Data Error. But it's happening often, Please help us, what should we do.
Also, please advice us, if we clear older results, whether it may be resolved. RE: Sysmex - XS-1000i
Updated Jun 22 2017
1 ReplyI have this sysmex xs- 1000i hematology analyzer and cannot use the system because its asking for a user name and password. I do not have the setup CD to get the user name and password. Please I need your help. RE: Sysmex - XS-1000i
Updated Jun 12 2017
1 ReplyHello,
Where can i buy various spare parts such as the valve solenoid LVM11-6A2-XS1 or the LVM11-6A3-XS1 in the USA? RE: Sysmex - XS-1000i