Draeger - Narkomed 2B
Draeger Narkomed 2B Forums
I can't move the lever from bag to auto to place the patient on the ventilator. Vent know is in the On position
RE: Draeger - Narkomed 2Bhi,im having problem with the tubing connections of my narkomed 2b.already checked it in tech manual but didnt see any diagram of gas selector switch and ormc.can anyone help me with this?please...
thank you,
arnold
RE: Draeger - Narkomed 2BI am in a pain clinic where all cases are MAC. We use the Narkomed 2b as a back-up in case of emergency, but 99% of the time only utilize the aux. O2. However the machine is turned on and checked daily. How do you silence the alarm that goes constanly saying %02Low, etc. You can silence for 120 seconds, but it is annoying to have to press the silence alarm button every 2 min during a 10 hr day!! What is the trick to silencing that alarm for the duration, yet keeping the machine ready to go as needed?
RE: Draeger - Narkomed 2BPls anyone can tell me how to install bios battery for computer board on newport E360 using cable CBL2132A. ( Plz with photo)
RE: Draeger - Narkomed 2BI have found a simple trick to aid when replacing tubing on the NM2, 3 and 4's. I use a heat gun to turn the opaque tubing clear. It is best if you have a small diameter welding nozzle on the gun. The tubing is more flexible after treatment. This avoids the problem of having multiple lines breaking as I am attempting to change them one by one. I have found this helpful. I hope you do as well. Only heat the tubes till they are clear, any further runs the risk of melting the tube. Also care must be taken when the line runs past wires or electronics. Any residue displaced should be vented during post replacement testing.
All the best, Ron.
RE: Draeger - Narkomed 2BHi,
I am looking for a CRT assembly for a Narkomed 2B - Can anyone help?
Thanks,
Chris
RE: Draeger - Narkomed 2BI have a Narkomed 2B with an unresponsive keypad ( 4 keys, just to the right of the CRT). Of course it is no longer supported by Draeger. Anyone got an extra one or suggestions??
RE: Draeger - Narkomed 2B
I am in dire need of a piping diagram for the Narkomed 2B. If noone has a diagram can someone help me to determine where the tubing goes from all three connections on the ORC.
RE: Draeger - Narkomed 2BDoes anyone know if there is a less expensive tubing alternative to their part number ML08003 / 4184994 ?
Or even if anyone knows the material specific information so I could find an alternative supplier?
Thanks
RE: Draeger - Narkomed 2B