- All Categories
- General
- Air Cleaners
- Alarm-Occupancy
- Analyzer Measurement & Simulator
- Apheresis Units
- Apps
- Audiometer
- Audiometric Booth
- Battery Testing
- Beds/Stretchers/Mattresses
- Blenders/Regulators/Flowmeters
- Brachytherapy System
- Continuous Positive Airway Pressure Unit (CPA)
- Dental Equipment
- Dictation System
- Electronystagmograph
- Enteral Feeding Pump
- Exam Tables & Chairs
- Facility Boom
- Hand/Foot Switch System
- Handpiece-Dental
- Headwall System
- Hemodialysis Unit
- Humidifier
- Hyperbaric Chamber
- Infant Incubators & Warmers
- Information System
- Infusion Pump
- Irrigation/Distention System
- Laser
- Lensometers
- Lift-Patient Transfer
- Light Source-Fiberoptic
- Lithotripter
- Medical Monitor
- Medication Management System
- Miscellaneous
- Nurse Call System
- Ophthalmic Equipment
- Oxygen Concentrator
- Patient Identification and Security System
- Peritoneal Dialysis Unit
- Phototherapy Unit (Hyperbilirubinemia)
- Point-of-Care Analyzer
- Pulmonary Function Analyzer
- Recorder
- Respirator-Air Purifying
- Scales
- Sequential Compression Device
- Slit Lamp
- Spirometer
- Sterilizers/Autoclaves
- Thermometer
- Traction Table
- Traction Unit
- Urodynamic Measurement System
- Ventilator
- Veterinary Equipment
- Vision Screener
- Warming Unit
- Warming/Cooling Unit
- Washer
- Wheelchairs
- Xenon System
Alarm-Occupancy Forums
Can a stadalone door access control system be intigrated into Facility Comander Wnx ?
RE: GE UTC Fire & Security - Facility Commander WnxI have a HID reader connected to a WIC-4 which is connected to a 8RP port. The reader grants access and the door unlocks, can also use manule controls to lock and unlock the door. Status shows reader is online and door staus. All functions are working exept i can not get the door to work on a door schedule. When i give the door a schedule set to unlock 8-5 the door will unlock and remain unlocked but at 5 the door will not relock. The next day at 8 the door will not unlock. i was told that the problem with the door is that one of the data wires was not make a connection at the 8RP port and there for the door would not work with a schedule. It seems to me that if on of the data wires is not connected then the reader should not work. Has anyone seen this to be true?
RE: GE UTC Fire & Security - Facility Commander WnxWhile setting a credential expiry date, i have to set the date by incresing one day more.
example:
Today is 03/19/2012
Im setting the expiry date for 03/20/2012 to active the credential for today(ie. 19-Mar-12)
But the credential not working I have to set the expiry date to 03/21/2012 to make the credential work today(ie. 19-Mar-12).
Is it the problem with the Leap Year(2012), im observing the problem after Feb'12.
Pls share the resolution if any...
RE: GE UTC Fire & Security - Facility Commander Wnx