Stryker - S3
by Stryker
Stryker - S3
Follow Us
DESCRIPTION
Monitors the patient's position in three zones and 30-degree Head Of Bed angleStryker's S3 reduces the risk of ventilator-associated pneumonia. The bed also offers one-hand operation of siderails, center-mounted brake, one-touch in-bed scale and superior ergonomics to reduce bending and twisting that can injure caregivers.
FORUMSView All (18)
0Repliesa year ago | MedSurg bed foot and head will not go up at the same time. Have a MedSurg S3 bed that the head and foot will not go up at the same time when raising the head of the bed. Individually they are fine. I was curious if it was part of the programming on this particular bed that would not allow it to raise the foot up when I am raising the head.Reply |
0Replies3 years ago | Error 601 - footborad screen How to fix an error for a stryker 3002 S3, or reset the footboard to work on gateway CPU. NOTE: Incompatible Footboard. Reply |
1Reply3 years ago | error 303 and 304 codes simultaneously. The errors are for FRFS and FLFS for the foot rail switches. I replaced them and they persist until the head is raised above 35 degrees then they magically disappear.. any ideas as to what might be causing this? Reply |
DOCUMENTS / MANUALSView All
SERVICE COMPANIESView All Bed Companies
FEATURES
[list] [*] Centrally-located brake pedal [*] 4-wheel, steel brake with swivel lock system [*] 6-inch (15 cm) casters [*] One-touch 30 degree Head Of Bed angle and lock [*] One-hand, intermediate siderails [*] Retractable frame [*] Open architecture—flat litter deck [*] Fowler angle gauge [*] Four IV pole and traction equipment sockets [/list]
| Bed Type | Electric |
| Length | 93 in |
| Patient Weight Capacity | 500 lbs |
| Width | 43 in with siderails up |