Esaote - My Lab 40
by Esaote

Esaote My Lab 40 Forums

1 Reply

Hi all, Looking for some assitance on an Esaote MyLab40. This issue is mostly there, but sometimes it works correctly. System boots, but you are unable to switch between the tabs ot the top of the sceen while it is starting. The QWERTY keyboard is unresponsive. CAPS lock remains on.  Some buttons on the control panel work. Trackball can be moved, but the three buttons around it do not work and therefore you cant select anything. Menus can be brought up by pressing the buttons like 'tools' and 'Menu' etc. The mouse pointer can move move.  The ON/standby button just below the monitor doesnt work. System freezes shortly after it has completely booted, then a message appears saying it wasnt shut down correctly and the system freezes. Because the mouse clicks or QWERTY keyboard buttons do not work, the message cannot be cleared and system is unusable.   Reseated all boards and cleared out a fair amount of dust from the PCB's. External mouse doesn't work on the system either, cursor doesn't move. Is this cable to control panel board, control panel, faulty QWERTY keyboard causing this issue or perhaps the PCB with all the VGA etc connectors on it? thanks.

RE: Esaote - My Lab 40
0 Replies

The ultrasound does not display images, only show the following red color code in the display: "16 DSP6414 " for the Motherboards

RE: Esaote - My Lab 40
Updated  Feb 9 2021
1 Reply

Hi everyone! Who have service manual for Esaote My Lab 40, please send me at e-mail sego.ts85@gmail.com. Thank you.

RE: Esaote - My Lab 40
Added  Jan 17 2021
0 Replies

Hello, I have the problem of a full or damaged hard disk, in the service manual the service key is needed to repair it, can someone provide the service key? Thank you.

RE: Esaote - My Lab 40
Added  Sep 18 2020
0 Replies

Hi guys! I believe that my unit is not booting the HDD so I need to access the BIOS and change the boot settings. What's the command on our unit to access it? All I could find on a service manual of other unit is that the BIOS password default is "laser".

RE: Esaote - My Lab 40
Updated  Jun 12 2020
4 Replies

Hi, I have an Esaote My Lab 40 that i've replaced the CMOS battery on. I now need to reset the BIOS. How do I access the BIOS from startup to reset it? Ben ben.fitzpatrick95@gmail.com

RE: Esaote - My Lab 40
Updated  Jun 7 2020
2 Replies

Hi, I have an Esaote MyLab 40 Vet ultrasound scanner that has a flashing keyboard logo on the top left. When I press Ctrl + Alt + Archive Rev it displays the errors 'CMOS battery low and CMOS checksum lost'. Any guidance would be appreciated. I gatther I would need to replace the CMOS battery but i'm unsure where in the unit it's located. Ben

RE: Esaote - My Lab 40
Updated  Feb 27 2020
1 Reply

Fuses are good and the monitor will turn on but no signal present at the monitor. The backlot keys do not light up on the controls either.

RE: Esaote - My Lab 40
Added  Dec 28 2019
0 Replies

The machine opens normally and then a message displays Internal system error with boxes of Ok and Details. Then machine mouse doesnt work. I used external mouse and clicked details and it showed the file and directory is corrupted and unreadable. I removed the box by clicking ok. the scanning is workin But other functions dont work like measurements. What is the next step to recover this problem.

RE: Esaote - My Lab 40
Updated  Dec 6 2019
1 Reply

System stuck in abdominal mode, does not return to home screen, no measurements/patient data entry/saving or printing pictures /change of presets or modes possible. Does not power down an returns to the same screen when switched off and restarted. Can anybody help ? Thanx!

RE: Esaote - My Lab 40

Start a Thread

Equipment Name: Esaote - My Lab 40
SIGN IN FIRST
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Please review our Privacy Policy for more details.
I Agree