Vital Scientific - Flexor Junior
by Vital Scientific
Vital Scientific - Flexor Junior
Follow Us
DESCRIPTION
A Random Access, Fully-Automated, "Walk Away" Clinical Chemistry Analyzer with a throughput of up to 100 tests per hour.The Vitalab Flexor Junior brings the excellent reputation of the Flexor family into every laboratory. From now on, a small clinical chemistry analyser no longer means that you have to sacrifice quality and performance. The Flexor Junior is the ideal combination in terms of proven technology, performance, versatility and price. It allows you to fulfill demanding requirements in small laboratory settings in the most convenient and cost effective way. The Flexor Junior is a truly open system that can operate using all chemistries that have already been adapted for the Vitalab Flexor. Clinical Chemistry, Special Proteins, Drugs of Abuse, Therapeutic Drugs, Electrolytes - you name it, the Vitalab Flexor Junior does the job without compromising quality. Having a throughput in the range of 100 tests per hour, the Vitalab Flexor Junior is the ideal benchtop random access analyser for small clinics, as a back-up system for medium size laboratories or as a special test analyser.
FORUMSView All (5)
0Replies2 years ago | spare parts Can someone tell me where I can buy the maintenance kit, or spare parts. Tkz Reply |
0Replies2 years ago | Flexor junior my junior fexor is with several mistakes, E07, E10, E32, E57, E63, E72, E75, E77 i think it might be an alarm only that it's desperating the Others.Reply |
1Reply9 years ago | precision What could lead to a low precision for Flexor Junior and how to correct it? Reply |
DOCUMENTS / MANUALSView All
FEATURES
[list] Reagent & Sample system [*] One rotor combining both sample and reagent positions; [*] Inner rotor ring: -15 positions for reagent bottles -Optionally cooled to approx. 12°C below ambient temperature; [*] Outer rotor ring: - 25 positions for samples, controls and calibrators; - 15 positions for reagent bottles at ambient temperature; [*] All reagent positions can be assigned as R1, R2 and R3; [*] Reagent 1 volume 110 - 400 µl; [*] Reagent 2 volume 0 - 180 µl; [*] Reagent 3 volume 0 - 180 µl; [*] Preheated reagent and sample needle with level detection and integrated mixer; [*] Typical reagent consumption 250 µl per test; [*] Continuous sample loading; [*] 13 mm OD primary tubes; [*] All sample positions can contain 5 ml primary tubes or sample cups; [*] Sample volume 1 - 30 µl per test, programmable in steps of 0.1 µl Analytical modes [*] Bichromatic end point measurement with or without bichromatic reagent blank and/or sample blank correction; [*] Two point measurement; [*] Graphic plot of all measuring points; [*] Automatic rerun with sample reduction; [*] Non-linear calibration curves Calculation modes [*] Prozone check for immunology tests; [*] Cut-off declaration. Quality control [*] Up to 15 different controls can be defined, 3 per test; [*] Westgard rules; [*] Levey-Jennings plots [/list]
| Height | 58 cm |
| Wavelength Range | 340 to 620 nm |
| Length | 60 cm |
| Light Source | Quartz-iodine lamp 12V-20W |
| Width | 89 cm |
Additional Specifications
[list] Photometric range: -0.1 to 3.0 Absorbance Water Consumption: 0.5 liter per hour Measuring temperature: 37°C Minimum measuring volume: 220 µl [/list]