Tuttnauer - EZ9
by Tuttnauer
Tuttnauer - EZ9
Follow Us
DESCRIPTION
The Fully Automatic AutoclaveWith the simplicity of one touch design all your sterilization and drying needs are fulfilled. The Tuttnauer EZ9 fully automatic autoclave will fill, sterilize, exhaust and dry at the touch of a button.
FORUMSView All (2)
4Replies7 years ago | Everything is lit up, but keyboard does not respond. Tried reset, holding start button while turning on, etc. Reply |
22Replies13 years ago | EZ9 sterilizer "low Water" unit display says low water all the time. It is also failing the cycle. Would this be the chamber sensor or the resovoir sensor? Any ideas? Thanks!!Reply |
DOCUMENTS / MANUALSView All
SERVICE COMPANIESView All Sterilizers/Autoclaves Companies
FEATURES
[list] [*] Closed door active drying system to maintain sterility and ensure efficient drying of packs and pouches. [*] High efficiency air pump circulates hot air after the sterilization cycle for fast drying. [*] Hepa filter 0.2 µm air filter (replaceable). [*] Pre-loaded cycles for: unwrapped instruments, wrapped/packs, glassware and additional drying cycle. [*] All program parameters can be customized and stored. [*] Automatic shut off at the end of both the sterilization and dry cycles. [*] Audible and visual cycle interruption alert. [*] Double safety locking device prevents door from opening while chamber is pressurized. [*] Low water sensor prevents activation of sterilization cycle when there is insufficient water in the chamber or reservoir. [*] Constant monitoring of temperature and pressure for sterilization. [*] Power outage recovery system. [*] Door design prevents steam from coming in contact with control panel. [*] Optional internal printer documents: date, time, temperature and pressure. [*] 510k clearance for dental handpieces. [*] Drain valve is located on the front, allowing for quick and easy draining of water reservoir. [/list]
| Orientation | Benchtop |