Conmed - Excalibur Power Plus ES
by Conmed

Conmed Excalibur Power Plus ES Forums

Updated  Apr 2 2022
1 Reply

Dear engineers. Any one know how to fix this error 3.0 in run mod and error 9.0 in cal mod I don't see error 9.0 in service manual I replaced u2 and the same problems any one know how to resolve this errors

RE: Conmed - Excalibur Power Plus ES
0 Replies

Dear Sir, I have a Conmed excalibur plus pc giving me error 9.0 in CAL mode. In normal mode it is restarting every 5 seconds. I can not see this error in the service manual. Do somebody knows what does it mean? Can I solve it and how? Thanks and best Regards

RE: Conmed - Excalibur Power Plus ES
4 Replies

I have Excalibur Power Plus but when I power it on it goes in continuesly reseting after every about 5 seconds. When I put the machine i CAL option it says Err 4.0. Can you give me any suggestions please? Thank you!

RE: Conmed - Excalibur Power Plus ES
1 Reply

I have Excalibur Power Plus but when I power it on it goes in continuesly reseting after every about 5 seconds. When I put the machine i CAL option it says Err 4.0. Can you give me any suggestions please? Thank you!

RE: Conmed - Excalibur Power Plus ES
Updated  Jul 30 2019
2 Replies

Hi, when i turn on the unit the error SLF diA 01 appears. And when is turn on, on cal mode the error 9 shows. Does anybody know whats the problem ?

RE: Conmed - Excalibur Power Plus ES
Updated  Dec 19 2018
2 Replies

Hi good afternoon. I currently have an Excalibur plus esu Unit. That displays the 5.0 error and starts making a long beep noise. I've checked other answers about this specific problem. They say that probably one of the fuses Is not working. I have already checked them out. All of them are ok. Do you have any suggestions on what's going on. Or how to proceed? Please Let me know , thank you very much. I'll leave you my mail if you can send me anything it will help. moises.garcia.sanchez@outlook.com Best regards, Moises García Sorry for my bad english, it's not my native language.

RE: Conmed - Excalibur Power Plus ES
1 Reply

Quiero saber las potencias recomendadas asi como en cuál modo es recomendable usar. Corte: puro o blend? Coagulación: standard o spray?

RE: Conmed - Excalibur Power Plus ES
Added  Feb 4 2016
0 Replies

Good morning, 

I was browsing through your website and didn't find the information i was looking for. Is it possible for you to email me an operating manual for ASPEN EXCALIBUR PLUS PC (ELECTROSURGICAL UNIT) model#60-6250-001 & SN#99KGE 001? Also, another piece equipment called SABRE 2400 ELECTROSURGICAL UNIT model#60-5600-002 & SN#02GGS-002? If you could help me with this I would greatly appreciate it. You can contact me at 509-575-5577 or email me at Emoreno@yakasc.com.

 

 

Best Regards, 

Elizabeth Moreno

 

 

 

RE: Conmed - Excalibur Power Plus ES
Added  Apr 15 2015
0 Replies

DESPUES DE UNOS 20 MINUTOS EL EQUIPO LOS LED DEL EQUIPO PARPADEAN Y SE BLOQUEA.

RE: Conmed - Excalibur Power Plus ES
Updated  Jan 21 2015
1 Reply

bought used unit for my veterinary practice, didnt come with the ground pad. Can it be used without? if not, know where I can track one down?

RE: Conmed - Excalibur Power Plus ES

Start a Thread

Equipment Name: Conmed - Excalibur Power Plus ES
SIGN IN FIRST
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Please review our Privacy Policy for more details.
I Agree