GE HealthCare - Innova 2100 IQ
GE HealthCare Innova 2100 IQ Forums
dear admin & member
hi, i'm new member in here, can i get the manual service?
thx
BR
RE: GE HealthCare - Innova 2100 IQNeed to know if there are any humidity and temperature requirements/specificications that come with the use of this equipment?
RE: GE HealthCare - Innova 2100 IQI'm working on an engineering study at my facility and am looking for the physical specifications for our GE Innova 2100 IQ . Specifically, I'm looking for the weight, electrical requirements, and heating load. Does anyone have a generic cut sheet for this machine? Thank you.
RE: GE HealthCare - Innova 2100 IQAttempting to repair GE collimator , part# 5127609
"Performed testing on Innova 2100 collimator. Collimator was found to be non-functional with numerous collimator power failure errors. Attempts were made to test cabling and run diagnostics, however collimator would not boot far enough to do so."
Error Reads:
600524 - Under Table collimator error height limit switch
3400017- System boot successful
600206- Under Table collimator is offline
3400005-The System is booting
3400012- The system is resetting
600524-Under Table collimator error height limit switch
3400017-System boot successful
600206-Under Table collimator is offline
RE: GE HealthCare - Innova 2100 IQHi,I have problem with GE Innova 2100Iiq. The system dispays collision on the detector. I have checked the collision circuitry - there is no collision and all collision switches operate normally. I suspect PID bd, but I'm not very sure. Has anyone had a similar problem?Thanks for your response.
RE: GE HealthCare - Innova 2100 IQAs a conscientious employee, I initiated a cost savings idea, We have 5 GE Innova Cath Labs and cutting the contract just to a co-op level will save $55,000 a year. Training is required, but now there's a new requirement. I must sign an agreement to stay three years or pay back the cost of training. So my employer needs a trained technician to save money and reduce response times when a system goes down, but in my eyes, I'm the one stuck behind the eight ball. When the next training comes along, I'll be extending my obligation and adding to the cost. This leaves me totally irritated and ready to lead a rebellion. A “call to arms” I shout! Well before we pull out all the stops let’s start out with a call for solidarity. Signing these kinds of agreements will destroy any chance at fair compensation for the length of the agreement along with setting a dangerous precedence that will affect the future training of all Biomeds. Start with discussions at the shop level. Take these concerns to the local biomed society and lobby all the national groups. Ask yourself, can I afford to stay silent. Your manager, director and c-suite has plenty of horsepower. Only as an organized group can this practice be changed to reflect appropriate risk to both employee and employer. So take a minute to answer my question" what is a Biomed that doesn't continue training on new technology?"
RE: GE HealthCare - Innova 2100 IQ