GE HealthCare - Vivid E9
DESCRIPTION
The Vivid E9 is GE Healthcares first cardiovascular ultrasound system built specifically for 4D imaging.Whether in 4D TTE or 4D TEE, capture the entire heart in a single beat. Image a valve, or the entire ventricle. And help break down the barriers to routine day-to-day 4D imaging, from acquisition, through navigation and quantification, to archiving. The Vivid E9 is available in both 2D and 4D configurations.
FORUMSView All (17)
1Reply2 years ago | Lower operational panel malfunction Hello, we have an issue with Vivid E9. Lower OP doesn't show any graphics (blackscreen) and deck knobs doesn't change any parameters after start. But LCD backlight lamp works and touchscreen reacts on tapping it in up left corner with sound in loudspeakers. Some of deck buttons are backlighted and start/stop button definitely works. Trackball works normally as well. All other Vivid E9 functionality seems to be ok. All cables' connections have been inspected and looked ok. What can be the reason of this issue and how to fix it? Thanks in advance for your ideas Reply |
1Reply3 years ago | I am getting "No exam with todays date" error I keep getting "No exam with today's date" error date and time are correct for the exam and also on the ultrasound. Reply |
7Replies5 years ago | Device goes ON/OFF by itself Hello, I've problem with Vivid E9. When I turn mains switch behind on, power button goes amber than green, and device goes on, but after few seconds shuts off (all vents spin, cpu vent too). Even I got GE logo on monitor. Device stays on sometimes 10 seconds sometimes one second and than switch it off. When I look at LED on BEP 6 power supply board and device goes fully on all LEDs are lit but with sudden OFF only 5VSB stays on. Then I switch off back switch and try to power on again, but then only LEDs 5VSB +28V and +48V lits for few seconds (5VSB stays again). I don't touch anything, but device goes on again than off, than on...off.... 5V in standby is about 4.7V. When I get 48V LED measured voltage is OK. That means that main power supply is OK? Is BEP 6 PS board faulty? https://i.postimg.cc/pd3VvqKf/20191001-153140.jpg https://i.postimg.cc/W4dpxQqp/20191001-211735.jpg LEDs on second photo are not dimmed, I took photo during LED turning off Regards! Reply |
DOCUMENTS / MANUALSView All
SERVICE COMPANIESView All Ultrasound Systems Companies
FEATURES
- Industry’s first configurable TEE transducer
- New tilt and rotate function
- Live “2-Click Crop” tool
- Workflow enhancements can also be achieved during mitral valve acquisition with a dedicated MV button and during quantification with a new plug-in tool that has the potential to decrease assessment time.
Cart Based | 1 |
Clinical Applications | Cardiology |
Imaging Capabilities | 4D |
Portable | 1 |
Color-flow Mapping | 1 |
Image Display | 17 in The 17-inch all-digital high-definition LCD display tilts and swivels to a comfortable viewing angle. |