Forums

MACHINE SAYS OUT OF PAPER AFTER PLACING NEW PAXK. WONT PRINT RIGHT

Equipment: Burdick - Atria 3100

Hi i seem to have problems enabling tissue doppler imaging. Do i need a license for that?

Equipment: Ge logiq E

zxckjlkjlkjkl

Equipment: zxc kjhkj

Could anyone provide the service password for the Power Led 300 Storz?

Equipment: ower Led 300 Storz

What are the input video signal options of the OEC7700 split screen display?

Equipment: GE OEC7700

Dear Sir,

I got your email from medwrench.com .

i have a problem with the device in the power on the batteries were dead i connect a generator instead of the battery , it powered on but it doesn't complete and sent a message that it will shut down and discharge the batteries .

Also the AC indicator does not lights when the power cable connected.

i hope you can help 

thanks in advance

Regards

Mkrtich Mkhsiyan
Dialog4 LLC, Aztutyan lane 4/44
Yerevan 00054
Armenia
+374 77 980098

Equipment: Esaote Mylab30

Let me ask you a question.
There are two "SIEMens ARCADIS Orbic-arm", and the computer "a" (Celsius M720) fails, replicates the hdd of the other device "b" (Celsius M720), and boots the "a" computer.
It says that the service key is different at the start of the "a" computer syngo program, will it work normally if I get a service ski using the existing "flexid" in "a"?
Thank you.

Equipment: Olympus - ESG-400

Fluro is working good,but during radiography (mAs) value decreasing automatically and exposure also not happened.Not showing any error.What could be the problem)?

Equipment: Axiom iconos R200

Hi!  When lowering the bed, there was a table too close which prevented lowering.  After moving the table, none of the controls work.  I've unplugged and plugged back in but no response to button presses.  Is there a reset somewhere or have I fried the motor?