Forums

Hi!  When lowering the bed, there was a table too close which prevented lowering.  After moving the table, none of the controls work.  I've unplugged and plugged back in but no response to button presses.  Is there a reset somewhere or have I fried the motor?

This unit ( Siemens Sonoline G40) boots up but then comes up with error message "Imaging Initialization failed. System shutting down." Would anyone have an idea as to how to track the problem down or fix the problem???? Thanks for your help

ISO service manual for a Siemens 3D V overhead tube crane

Equipment: Siemens 3D V ceiling stand

User manual

Equipment: UBAT tool OEM#: 5307604

Does anyone know of a list of MRI compatible vital signs monitors?

Equipment: General Vital Signs Monitors

Does anyone know of a list of MRI compatible vital signs monitors? 

Equipment: General Vital Signs Monitor

Dear friends,

I´m looking for Technical reference manual for Aisys CS2. Can you offer me? Not CS1 please...

Best, Jan

jn2021xl@gmail.com

Equipment: GE HealthCare - Aisys CS² with ecoFLOW

Equipment: Mindray BC-10

dear all 

i have one siemens axiom aristos vx pluse. all the time i have error 402 from apld 80 and down in monitor write heating current at min. can some body help with any error description. Thank you in advance

Equipment: SIEMENS Axiom Aristos VX Pluse

Hi there!
I've got a problem with this CR: it constatly shows me "Cassette insertion remove" error on display and do not work.

0) Yesterday operator called me and showed a problem: "Cassette insertion remove" error on display. I've tried to turn off/on machine, but after reset messege still exist. 
1) After some waiting and few turns on/off, moving transporting unit it at last showed ready status. 
2) We tried to make reading procedure: registring cassettes on CS3, insert first cassette, got result, but on isertion of second cassete got error "Improper insertion press eject". 
3) Pressing eject won't helped: insertion roller is moving, but elevator mechanism of transport unit don't. Holding eject button or pressing repeatedly do not help either.
4) I've opened front door, removed cassette by hand and closed a pannel. After this i've got "Cassette insertion remove" error. 
5) Turning off/on won't help. Rebooting a system through left pannel switch off/on do not help either: after turning on the system initialization begins and on first squares of progress i've got buzzer sound and "Cassette insertion remove" error on display. Transporting unit move and other procedurs does not activated: elevator of transport mechanism in lower position, like a cassette inserted, and shutter on isertion mechanism is open. Multiple reboots won't help, got same error on startup.

6) After waiting a night and tring to boot it started up normaly: full initialization, somthing moved inside, shutter closed lamp is light for a moment and got "Ready" status. Tried normal reading procedure and got in situation as above (1-5): succesfull reading of first cassette and "Improper insertion press eject" on second.

Had someone faced similiar situation? How do you managed it? Do you have any ideas on faulty mechanism? 
Probably you know how to get access to "dummy SCBZ program" which could be handy to test unit-by-unit testing and spoting a problem

Thanks!