Lumenis - AcuPulse 40WG with FiberLase CO2 fiber
by Lumenis
Lumenis - AcuPulse 40WG with FiberLase CO2 fiber
Follow Us
DESCRIPTION
Performance where you need it.Designed for multi-purspose use, this device is unique among CO2 waveguide systems, offering up to 40 watts of power through the fiber with little beam divergence.
FORUMSView All (3)
0Replies10 years ago | LUMENIS ACUPULSE 40 I NEED TO ADD SOME STERILE WATER FOR THE COOLING FUNCTION. HOW DO I ACCESS THE FILL AREA? Reply |
0Replies13 years ago | Lumenis Introduces the FiberLase™ CO2 Fiber and AcuPulse™40WG CO2 Laser System Santa Clara, CA (Vocus) September 23, 2010 Lumenis Ltd., a global developer, manufacturer and seller of laser, light-based devices for surgical, aesthetic, and ophthalmic applications, announces the new FiberLase CO2 Fiber powered by the AcuPulse 40WG CO2 Laser for multi-application use. The AcuPulse 40WG CO2 laser offers 40 Watts of fiber input power, which is unique among CO2 waveguide systems on the market. The flexible FiberLase fiber also has the lowest beam divergence of comparable devices. The combination of high power and low beam divergence result in faster treatment times and a more precise and consistent tissue effect. Unlike any other flexible CO2 fiber systems, the AcuPulse 40WG has a diode aiming beam delivered to the tip of the FiberLase fiber allowing accurate targeting of the tissue being treated, and as a disposable fiber, the FiberLase reduces the risk of patient-to-patient contamination. A further advantage is that the distal tip of the FiberLase can be renewed during the procedure in case of power loss due to contact contamination. This allows the procedures to continue with no need to use additional fibers increasing cost effectiveness. The FiberLase flexible CO2 fiber is also longer than other products on the market and at 2 meters long it facilitates convenient OR set-up and fiber durability. “The FiberLase product is the next evolution in flexible, multi-application CO2 laser system technology and is especially suited for the fields of otolaryngology and neurosurgery. Lumenis is very excited to add this system to our line,” states Surgical Vice President Caroline Coyle. “The benefits of the FiberLase CO2 fiber are apparent. The aiming beam is extremely helpful in targeting specific tissue. Additionally, this fiber allows very accurate dissection near critical structures minimizing thermal injury to adjacent healthy tissue,” explains, Dr. Marc Remacle, Professor of the faculty of Medicine at the University of Louvain, Belgium. The unveiling of the AcuPulse 40WG with FiberLase will take place at the 2010 American Academy of Otolaryngology-Head and Neck Surgery Annual Meeting in Boston, Massachusetts, September 26th-29th. Visit our booth #929 to speak with experts Dr. Mark Remacle or Dr. Mark Courey about the latest innovations in CO2 laser surgery and have an opportunity to demo the new AcuPulse 40WG. For more information, please visit http://www.surgical.lumenis.com/acupulse40wg About Lumenis Lumenis, one of the world's largest medical laser companies, is a global developer, manufacturer and distributor of laser and light-based devices for surgical, ophthalmic and aesthetic applications, with more than 800 employees worldwide. Lumenis has nearly 250 patents, over 75 FDA clearances, an installed base of over 80,000 systems and presence in over 100 countries. Lumenis endeavors to bring the finest state of the art technology products to the market, fulfilling the highest standards of excellence, quality and reliability, delivering premium value and service to its customers. The name Lumenis is derived from the Latin words meaning "Light of Life" highlighting the light which is the basis of our technologies used to enhance life. For more information about Lumenis and its products, please go to: http://www.lumenis.com For further information contact: Michelle Maydan Director of Corporate Communications 1-866-569-0597 +972-4-959-9004 e-mail: mmaydan@lumenis.com [url=http://www.prweb.com/printer/4556694.htm]Article Source[/url]Reply |
0Replies13 years ago | FiberLase™ CO2 Fiber with AcuPulse™ 40WG CO2 Laser System The AcuPulse 40WG CO2 laser is a state of the art CO2 laser system designed to deliver high beam quality laser energy through a small, flexible waveguide fiber called FiberLase. Key features include capability of 40 Watts of power in Continuous Mode and 15 Watts in SuperPulse mode of delivery. The laser also delivers a red diode aiming beam through the tip of the fiber. The laser is equipped with an integrated air pump for purge air to cool the fiber or accommodates the use of external sources of purge gas. The FiberLase™ CO2 Fiber delivery is especially advantageous and convenient when traditional microscope controlled "line of sight" delivery does not easily access the anatomy. The fiber is held in ergonomic reuseable handpieces which are either rigid, or malleable that can be formed to individual patient access requirements.Reply |
DOCUMENTS / MANUALSView All
VIDEOS
FiberLase™ CO2 Fiber with AcuPulse™ 40WG CO2 Laser System
FEATURES
[list] [*] Up to 40 Watts fiber [*] Aiming beam [*] Low beam divergence [*] 2 meter long CO2 fiber [*] Renew distal tip of fiber during procedure [*] Fiber support guide & handpiece support arm [*] Higher output & faster input power treatments [*] Enhances ability to target tissue [*] Precise & consistent tissue effect [*] Increased mobility with renew capability [*] Fiber continues working throughout procedure resulting in less cost [*] Allows for efficient OR set-up [*] Convenience & cost-savings [/list]
| Laser Type | C02 |
| Height | 47 in |
| Length | 15.8 in |
| Weight | 110 lbs |
| Wavelength | 10600 nm |
| Width | 14.6 in |
Additional Specifications
Laser Operating Modes: Continuous Wave (CW), Pulser, SuperPulse CW Power: 1 - 40 W SuperPulse Average Power: 0.5 - 15 W Pulser Average Power: 1 - 35 W Controls: Multi-color, high resolution touch panel & footswitch Aiming Beam: Up to 5mW red diode laser, 635 nm, adjustable intensity, blink on/off Laser System Cooling: Self-contained, closed cycle CO2 Fiber Cooling Self-contained internal air pump or option of external pressurized purge gas
NEWSView All
Lumenis Introduces the FiberLase™ CO2 Fiber and AcuPulse™40WG...
Santa Clara, CA (Vocus) September 23, 2010 Lumenis Ltd., a global developer, manufacturer and seller of laser, light-based devices for surgical, aesthetic, and ophthalmic applications, announces the new FiberLase CO2 Fiber powered by the AcuPulse 40WG CO2 Laser for multi-application use. The AcuPulse 40WG CO2 laser offers 40 Watts of fiber in...