Stryker - High Flow 40-Liter Insufflator
by Stryker

Follow Us
DESCRIPTION
Stryker's 40-liter insufflator maintains pneumoperitoneum under extreme conditions for reliability during all laparoscopic procedures.

Stryker’s 40-liter insufflator combines exceptional performance and safety. The insufflator is designed to handle the needs of today's dynamic surgical environment. Its ability to maintain pneumoperitoneum under the most extreme conditions for reliability during all laparoscopic procedures. In neonatal mode it offers increased sensitivity for pediatric patients.      
As an accessory, the Ultra Flow version of the Plume-Away Lap S.E.S provides continuous removal of smoke produced by electrocautery, laser and ultrasonic surgical devices during laparoscopic procedures.

FORUMSView All (11)
Ask a New Question

3

Replies
-samico
4 years ago
Stryker high flow 40l, Contamination alert then , device defect, call service, calibration error
I have problem, alert : device defect ,call service ,calibration error I did all calibration successfully but problem still. any one have solution?Reply

4

Replies
-Erick-BMET
7 years ago
contamination
i have a stryker high flow 40 liter insufflator that indicates "contamination", please help me reset the unit. Is is saying "Call service". I cannot find it exactly in the service manual i just downloaded from Med -Wrench. ErickReply

3

Replies
-kiyani
8 years ago
High flow 40-Liter insufflator

This is Kiyani from Quaid-e-Azam international hospital Islamabad Pakistan

we have Two Laproscopic towers Stryker 1188 HD Before both towers were working good but now Insufflators are becomes faulty the Error is device defected call service ,any body can help me regarding these errors.

your prompt action shall be highly appriciated in this regard.

Best Regards

Kiyani

Reply
DOCUMENTS / MANUALSView All

FEATURES

  • The highest flow rate available on the market      
  • Neonatal mode offers increased sensitivity and floew rates as low as .1 liters per minute      
  • LCD display provides surgeons with ongoing status messages      
  • Sidne compatibility allows the surgeon to control the insufflator with voice commands      
  • Software driven to allow for future upgrades      
  • Built in gas heating technology      
  • Video on-screen display
    1.       
    Safety      
  • Surgivent-electronic venting system for added safety      
  • Visual and audible warning signals      
  • Safety Relief Value      
  • Internal Leakage Detection
  • SPECIFICATIONS

    Height5.83 in
    Length 18.7 in
    Weight19.84 lbs
    Width12.52 in

    Additional Specifications

    Power Supply Input: 100-240 Vac; 3.5A 
    Frewquency: 50-60 Hz 
    Power Consumption: 150 VA 
    Operation Conditions - Temp: 50-104 F 
    Operation Conditions - Humidity: 30% - 75%

    This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Please review our Privacy Policy for more details.
    I Agree