Philips - IntelliVue G1 and G5
DESCRIPTION
Gas Monitor
Versatile IntelliVue Anesthetic Gas Modules measure the five most commonly used anesthetic gases, as well as nitrous oxide (N2O) and carbon dioxide (CO2). Waveforms for all gases are displayed on Philips IntelliVue patient monitors along with inspiratory and end-tidal numerical values. In addition, the minimal alveolar concentration (MAC) is calculated from the anesthetic agents measured, including N2O. The IntelliVue G1 gas module measures the single agent selected manually by the clinician, whereas the IntelliVue G5 automatically identifies agents and features mixed-agent measurement capability. A fast oxygen (O2) measurement based on advanced paramagnetic technology is optional with the G1 and included standard with the G5.
FORUMSView All (5)
1Reply7 months ago | No gas analysis Used MP30 with M1019A gas analysis. Stopped providing Sevoflurane reading halfway through 10th case. Ideas? Equipment: Philips G5 M1019A Reply |
1Reply3 years ago | Waveforms Not Showing I have Philips G5 Gas Module it's working and all the LED are On but not showing Waveforms on Monitor so pls helpfulReply |
0Replies5 years ago | Service Manual Hello there community, Just wanted to know if anyone had a digital copy of the service manual for a Philips IntelliVue G7 Anesthetic Gas Module. I tried looking on InCenter, but no luck there. Thanks in Advance!Reply |
FEATURES
- Real-time gas monitoring data displayed on the patient monitor
- Quick warm-up time
- Rapid response time
- Individual alarm limits for each parameter
- Automatic zero calibration
- Lifetime calibration for easier maintenance
- Highly durable solid-state sensor design
- The IntelliVue gas modules provide clinically solid measurements
NEWSView All
Device Alert
See attached PDF May Display Unusually High Sample Flow Rate, Potentially Resulting in Failed Zero Calibration