FORUMSView All

FEATURES

• State-of-the-art non-dispersive infrared (NDIR) technology identifies and measures five anesthetic agent gases: Halothane, Enflurane, Isoflurane, Desflurane, and Sevoflurane.
• Automatic or manual modes.
• Breath-by-breath O2, CO2, and N2O monitoring. Gas flow was sampled at 100, 150, and 200 ml/min. Mixed agent identification.
• Measurement accuracy is not affected by alcohol.
• Fast warm-up time ensures full accuracy within minutes.
• Auto-calibration.
• Bright, real-time display of numerical values and waveforms provides instant notification of changing patient status.
• Lightweight, portable design provides flexible workspace options.

Additional Specifications

Gas Monitoring

• Method: Sidestream; Non-dispersive infrared (NDIR)
• Identified Gases: Halothane, Isoflurane, Enflurane, Desflurane, Sevoflurane, CO2, N2O, Oxygen
• Output Data: Inspired and end-tidal gas concentrations; continuous real-time gas concentrations; respiratory rate (elapsed time since last breath); agent identification (primary agent and mixed agents); system information (diagnostic status messages)

Agent Detection

• Measurement Range:
• Halothane: 0 to 10%
• Isoflurane: 0 to 10%
• Enflurane: 0 to 10%
• Desflurane: 0 to 20%
• Sevoflurane: 0 to 10%
• CO2: 0 to 12.5%
• N2O: 0 to 99%
• Oxygen: 0 to 100%

Measurement Accuracy

• Agents: ± (0.1% abs. + 4% reading)
• CO2: ± 0.2% abs. or 4% of reading
• N2O: ± (1.5% abs. + 4% of reading)
• Oxygen: ± 3 vol.% (for 0-90%), ± 4 vol.% (for 91-99%)
• Time to Detect Agent: < 15 seconds @ 200 ml/min
• Agent Detection Resolution: 0.1 Volume Percent
• Mixed Gas Threshold: 0.2 vol. % +10% of total concentrations