Stryker - 1288 HD
by Stryker

Follow Us
DESCRIPTION
Endoscopic Camera

A groundbreaking new development of this endoscopic camera is its ability to allow for wireless transmission capabilities in the operating room when used with the Stryker WiSe wireless flat panel monitor. With the WiSe technology, operating room clutter will be reduced with the elimination of the 30 ft. DVI cable to the secondary flat panel monitors in the room.    As the third generation in Strykers HD 3-Chip endoscopy camera line, the 1288 HD 3-Chip Camera features a 1920x1080p resolution and nine specialty settings, resulting in optimum color resolution and brightness.    Additional benefits of the 1288 HD 3-Chip Camera include four fully programmable buttons on the endoscopic camera head, giving the surgeon the command to control the light source settings directly from the camera head. Also, by allowing for backwards compatibility with past generation digital capture devices, scopes and various flat panels, the 1288 HD 3-Chip Camera continues to offer new solutions for improved visualization within the operating room.

FORUMSView All (4)
Ask a New Question

0

Replies
-z7ua
5 years ago
service manual
Main board was filled with saline and now the device does not turn on. The power supply unit provides 12V and 5V, 3.3 and 5 V are supplied to the front display board. The main board is marked as PCB P10407 rev ? /ASSY P11418. I recovered bga contacts on Altera Cyclon3 chip, but nothing changed. This board has USB type B, is it posible to connect to pc for diagnostic. Anybody have service manual for this device?Reply

1

Reply
-jatjag
6 years ago
stryker 1288 touchpad
I have one stryker 1288 hd camera.I think it is stucked. It's touch panel is not responding.Nor getting any video out .But unit powers on nicely. Is there any reset procedure for this unit? Or any body can help me with it's service manual please.Reply

2

Replies
-viperpiper
9 years ago
Intermittent E1 Error ?

Does anyone know what may cause the E1 error code.   Is this something that just happens sometimes when cameras are connected/disconnected while the controller is turned on ?  It seems to happen with different camera's on the same box and very intermittent.  There's really not much information on what causes this error.  Any help appreciated.

 

 

Reply
DOCUMENTS / MANUALSView All

FEATURES

[list]  [*] 1920x1080p resolution  [*] Improved clarity, focus and sharpness  [*] Wireless transmission capabilities when used with the Stryker WiSE wireless monitor  [*] Touch screen LCD interface  [*] Fully programmable camera head buttons  [/list]

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Please review our Privacy Policy for more details.
I Agree