Getinge - 400/500HC Series
by Getinge

Follow Us
Visibly better by design

Getinge 400/500HC-E Series Steam Sterilizers deliver an unmatched combination of sterility assurance, cycle flexibility, real-time information access and advanced operator control. These sterilizers are are ideal for new construction or replacing older models, offering increased chamber loading capacities within the same wall openings and footprints of your current units. 
Featuring the new AVANTI 8.4" touchscreen display making it easier than ever to custom name cycles for fast, accurate identification. The 422HC-E and 522HC-E Series offer cycles employing either gravity/downward displacement or pressure/vacuum pulsing. Offering up to 14 cycles (422/522HC-E) and up to 24 cycles (433/533HC-E) , in two easy step for applications including for applications including wrapped and unwrapped porous and non-porous hard goods, utensils, gowns or towel packs and liquids in self-venting or unsealed containers.

FORUMSView All (45)
Ask a New Question


-Sal Reyes
20 days ago
Canc SW door
Hi everyone, still get know this machines. At this momenta I have a 533hc with the following problem, when I start a cycle (no mattwr gravity, flash or pre vac) after the purge o during the conditioning, the cycle is aborted, and display "Canc SW door" (actually the error is displayed in Spanish). The steam generator goes well, the control board detects the input and shows the output signals correct, but, the problem is that... anyone can give me a hand or clue to fix this problem? By the way I have the service manual for this models in pdfReply


-Sal Reyes
3 months ago
Problem with steam boiler 433HC
Hi everyone. I have a 433 HC with the following problem: when the steam boiler starts to filling, when reaches the hight probe stops, and the contactor is energized and start to heat up. At this point is normal, but, the problem starts a few minutes after, when suddenly the led FAULT in the control board of the boiler light up and turn off the contactor, then light off and the contactor is energized, and then the FAULT led is light up and cuttoff the contactor and the situation goes on and the steam is not produced. What do you think the problem is? Thanks in advance Reply


-S Gutierrez
3 months ago
Getinge Technical service 61301606091
Hi everyone, can anyone provide me with Service Technical Manual part# 61301606091 for 433HC/533HC steam sterilizer Reply
SERVICE COMPANIESView All Sterilizers/Autoclaves Companies


  • Optimized for OR/Point-of-use Sterile Processing, Central Sterile Processing (CSSD) and surgery centers 
  • Avanti touch panel control interface 
  • Multiple shelf adjustments for larger loads 
  • USB port standard for downloading back-up cycle performance 
  • NetCOM standard with controls for Ethernet connection to Getinge Online and T-DOC


Chamber Depth26 in Models 422HC-E and 433HC-E
Chamber Height17.5 in Models 422HC-E and 433HC-E
Chamber Width17.5 in Models 422HC-E and 433HC-E
OrientationFloor Standing
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Please review our Privacy Policy for more details.
I Agree