Konica Minolta - Regius Model 110
by Konica Minolta

Computed Radiography System
The REGIUS Model 110 is a high performance single bay CR system that can process up to 76 plates per hour (14"x17").
A touch screen control station provides intuitive software tools for easy operation.
Compact size and space saving design highlight the REGIUS Model 110.
1Reply2 months ago | shipping brackets I am looking for instructions to install and remove shipping brackets. Equipment: Konica Minolta - Regius Model 110 Reply |
1Reply4 months ago | Network board part # 090171005A and 0901H1005 Had a power surge during Monsoon storm and unit will not connect to network. Need network board/dicom board replacement Equipment: Konica Minolta - Regius Model 110 Reply |
6Replies7 months ago | Illegal bar code The system turn on normal but when i want to insert cassette its say Illegal bar codeReply |
CR-System Configuration | Single-plate floor unit |
Exposure size- 14×17/14×14/11×14/10×12/8×10/
18×24cm/24×30cm/15×30cm and other sizes
Sampling Pitch- 2Types:87.5Μm/175Μm
Maximum Resolution- 4020×4892 (14×17/87.5Μm)
Digital Gradation Level- 4096 levels (12bit)
Processing Capability- approx. 76plates/hour (14×17/175Μm)
Cassette Feed/Load Time or Cassette Cycle Time- approx. 47 seconds (14×17/175Μm)
Outer Dimensions/Weight- W740×D365×H747mm/approx. 100kg
Power Consumption- AC100/110/115/120/200/220/230/240V ±10%
50/60Hz approx. 0.8kVA
Operating Conditions- Temperature:15-30? Humidity:35-80%RH (no condensation)