Siemens - Arcadis Orbic 3-D
by Siemens

Follow Us

Mobile C-Arm 

ARCADIS is an entirely new generation of C-arm technology that marks the start of a new era in the OR, offering completely new possibilities. ARCADIS integrates syngo, the unique software platform for virtually all Siemens imaging systems, into the operating room. Syngo allows virtually all imaging modalities and image-viewing workstations to use the same intuitive user interface for system operation, image post processing and overall networking. ARCADIS integrates modalities such as CT and MR into the clinical workflow as well as the overall network. With syngo, users can access all clinical patient information online, at the click of a button. In addition, syngo new synergies for clinical workflow and can decrease the training needs of the hospital staff. The result? Significantly increased efficiency in your OR.

FORUMSView All (12)
Ask a New Question


2 years ago
suche Festplattenkopie Siemens Arcadis Orbic 3D
Hallo ich suche eine Kopie der Festplatte, oder recovery CD. Mit freundlichen GrüßenReply


-Medical Tech
2 years ago
Arcadis orbic 3-d shuts off
Hey, guys. So, the arcadia orbic 3-d when you turn it on, it shuts off in about 5 seconds on it's own. The hard drives were reformatted and the coin battery and bios were done. Does anyone know why it keeps shutting down ? Or where I should start looking for the problem? Reply


2 years ago
Vertical Movement Doesn
Siemens Arcadis Orbic 3D Siemens I just moved my c arm from office to office ( few blocks) and after i started it everything wotks except vertical motion. The C arm is in the lowest position at 0 cm. When I press the controll I could hear the switch click but nothing happens Reply


  • Industry-exclusive true isocentric orbital movement enables time and dose savings by eliminating readjustments, especially for examinations involving several different projections. 
  • Industry-leading 190° orbital movement with 95° overscan enable virtually unrestricted positioning options for any projection which may be required.


Maximum Focal Spot0.6 mm
X-ray Generator Power Rating2.3 Kw
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Please review our Privacy Policy for more details.
I Agree