- All Categories
- General
- Air Cleaners
- Alarm-Occupancy
- Analyzer Measurement & Simulator
- Apheresis Units
- Apps
- Audiometer
- Audiometric Booth
- Battery Testing
- Beds/Stretchers/Mattresses
- Blenders/Regulators/Flowmeters
- Brachytherapy System
- Continuous Positive Airway Pressure Unit (CPA)
- Dental Equipment
- Dictation System
- Electronystagmograph
- Enteral Feeding Pump
- Exam Tables & Chairs
- Facility Boom
- Hand/Foot Switch System
- Handpiece-Dental
- Headwall System
- Hemodialysis Unit
- Humidifier
- Hyperbaric Chamber
- Infant Incubators & Warmers
- Information System
- Infusion Pump
- Irrigation/Distention System
- Laser
- Lensometers
- Lift-Patient Transfer
- Light Source-Fiberoptic
- Lithotripter
- Medical Monitor
- Medication Management System
- Miscellaneous
- Nurse Call System
- Ophthalmic Equipment
- Oxygen Concentrator
- Patient Identification and Security System
- Peritoneal Dialysis Unit
- Phototherapy Unit (Hyperbilirubinemia)
- Point-of-Care Analyzer
- Pulmonary Function Analyzer
- Recorder
- Respirator-Air Purifying
- Scales
- Sequential Compression Device
- Slit Lamp
- Spirometer
- Sterilizers/Autoclaves
- Thermometer
- Traction Table
- Traction Unit
- Urodynamic Measurement System
- Ventilator
- Veterinary Equipment
- Vision Screener
- Warming Unit
- Warming/Cooling Unit
- Washer
- Wheelchairs
- Xenon System
General Forums
I have a fleet of 1105s and a few other similar Stryker stretchers, when pumping the bed up they have become hard to pump. They will o up just the amount of force required to push down the pedal is increasing. I have lowered the beds and checked fluids and they leak as soon as I pull the plug so I don't see a leak issue (no leaks found n the cylinders) Is it necessary to remove the top to check the cylinders? I know its easier with the top off but I'm a one man shop s top removal is tough.
Fluids levels look good.
No leaks detected on hydraulic.
No binding in the pedal assembly's.
If it was just 1 or 2 units I would replace the cylinders but it seems to be happening to a lot of them so I must be missing something.
Thanks For any assist.
Equipment: Stryker 1105 Stretcher and more
I have a problem 84 and 79 on a Lyra - can anyone help me solve that problem please - Thank you
RE: IRIDEX - Laserscope Lyra-iWhat is the meaning of Lumenis Resurfx M22 Error Code 2093
Equipment: Lumenis M22
RE: Lumenis - M22Hello , i need Agilia service sw for manteinance.... someone can help me ? thanks in advance
Equipment: Fresenius Kabi - Agilia SP TIVA
can anyone help me the machine is showing error 84 and 79 - it was sored for a year - was working fine - could this be related to low water level? thanks
RE: Laserscope - Lyra IHello everyone!
Does anyone know the specs of the thickness gauge (part no. UKOG-1004MCZZ) to which they refer to in the service manual p.107 or p. 7.1 (Introduction of the Checkout)?
Thank you!
Equipment: Baxter - Flo-Gard 6200
RE: Baxter - Travenol Flo-Gard 6200Hi, we are having a hard time finding patient's samples to validate this instrument. Is there another way? Can we run QC x20 times, during several days to collect data?
RE: Accriva Diagnostics - Hemochron Signature EliteWhat problem is it?
Equipment: Syneron-Candela - GentleYag Mini
RE: Syneron-Candela - GentleYag Mini