- All Categories
- Laboratory
- Amino Acid Analyzer
- Automation System, Laboratory
- Bilirubinometer
- Biomedical Freezer
- Biotech/Life Science
- Blood Culture Analyzer
- Blood Gas/pH Analyzer
- Blood Grouping System
- Cell Processor
- Centrifuge
- Clinical Chemistry Analyzer
- Coagulation Analyzer
- Cryostat
- Cytometer, Flow
- Electrolyte Analyzers
- Electrolyte Analyzers
- Electrophoresis System
- Embedding Center
- Glycohemoglobin Analyzer
- Hematology Analyzer
- Histology Analyzer
- Histology Printer
- Immunoassay Systems
- Incubator, Laboratory
- Laminar Airflow Hood
- Microbiological System
- Microplate
- Microscopy
- Microtome
- Oximeter, In Vitro, Laboratory
- Photometric Microplate Readers
- Platelet Aggregation Analyzer
- Refractometer
- Refrigerator, Blood Bank
- Slide Stainer/Prep
- Spectrometer, Laboratory
- Spectrophotometer
- Thyroid Uptake System
- Tissue Processor
- Ultrasonic Cleaners
- Urine Analyzers
- Warming Cabinet
- Washer/Decontaminator
Centrifuge Forums
Can anyone share a schematic and/or service manual for the Eppendorf 5415D centrifuge?
Thx,
Bob
Equipment: Eppendorf 5415D centrifuge
RE: EPPENDORF - Microcentrifuge 5415 DEquipment: Hettich - ROTOFIX 32 A
RE: Hettich - ROTOFIX 32 AWe have had imbalance issues with our Allegra X30R. The Motor boot is torn and I am guessing the motor mount is also damaged. It is out of warranty so I was looking for replacement parts and a tech doc on disassembly and replacement.
Anyone have some info that could help.
Equipment: Beckman Coulter Allegra X-30R
RE: Beckman Coulter - Allegra X-30So I swapped the front panel assembly and now the new piece does not turn on. I checked with the old part and no power there either. The board gets power but the board reset button does not work. Any insight on what steps need to be taken if any when swapping that part.
RE: Iris International - StatSpin Express 4Equipment: CENTRIFUGE CL10
RE: Thermo Scientific - CL10Equipment: EPPENDORF - Centrifuge 5702
RE: EPPENDORF - Centrifuge 5702They're not available from Eppendorf anymore, but the ID is 8mm, OD 10mm, flange is 14mm OD and 1mm thick, length 4mm.
McMaster-Carr p/n 57785K314
Igus GFM-081013-08, MFM-0810-05, TFM-081012-04, X6FM-0810-10
all work.
RE: EPPENDORF - Microcentrifuge 5424