- All Categories
- Laboratory
- Amino Acid Analyzer
- Automation System, Laboratory
- Bilirubinometer
- Biomedical Freezer
- Biotech/Life Science
- Blood Culture Analyzer
- Blood Gas/pH Analyzer
- Blood Grouping System
- Cell Processor
- Centrifuge
- Clinical Chemistry Analyzer
- Coagulation Analyzer
- Cryostat
- Cytometer, Flow
- Electrolyte Analyzers
- Electrolyte Analyzers
- Electrophoresis System
- Embedding Center
- Glycohemoglobin Analyzer
- Hematology Analyzer
- Histology Analyzer
- Histology Printer
- Immunoassay Systems
- Incubator, Laboratory
- Laminar Airflow Hood
- Microbiological System
- Microplate
- Microscopy
- Microtome
- Oximeter, In Vitro, Laboratory
- Photometric Microplate Readers
- Platelet Aggregation Analyzer
- Refractometer
- Refrigerator, Blood Bank
- Slide Stainer/Prep
- Spectrometer, Laboratory
- Spectrophotometer
- Thyroid Uptake System
- Tissue Processor
- Ultrasonic Cleaners
- Urine Analyzers
- Warming Cabinet
- Washer/Decontaminator
Centrifuge Forums
I have replaced the Locking Assembly and the Main Board
Still getting E 53 after the lid is closed and locked into place
Anyone ever have this issue?
RE: Beckman Coulter - Microfuge 20We just picked up an RC 6 Plus at auction but the control is locked out. Does anyone have the Access Control manual or at least know if there's a general admin ID and password we can use in order to reset the Access Control and run the instrument?
RE: Sorvall - RC 6 PlusI need to replace a condesor fan and it's K5 relay. I cannot find any information or part number for the relay. The fan might be part# 022669788 but I am not sure because that is for the newer model. If anyone has a parts list for the refrigeration group, or preferably a substitute part, that would be much appreciated. I was hopng to order before spending hours tearing down the machine to access the parts.
RE: EPPENDORF - Centrifuge 5810 / 5810 Rbonjour ,
svp comment puis je démonter le rotor de la centrifugeuse, merci
RE: Hettich - MIKRO 22 / 22 RMy Nuve NF1200R is indicating Err
with a red light indicator. This not balancing, how can I go by it.
Eng. Peter