- All Categories
- Laboratory
- Amino Acid Analyzer
- Automation System, Laboratory
- Bilirubinometer
- Biomedical Freezer
- Biotech/Life Science
- Blood Culture Analyzer
- Blood Gas/pH Analyzer
- Blood Grouping System
- Cell Processor
- Centrifuge
- Clinical Chemistry Analyzer
- Coagulation Analyzer
- Cryostat
- Cytometer, Flow
- Electrolyte Analyzers
- Electrolyte Analyzers
- Electrophoresis System
- Embedding Center
- Glycohemoglobin Analyzer
- Hematology Analyzer
- Histology Analyzer
- Histology Printer
- Immunoassay Systems
- Incubator, Laboratory
- Laminar Airflow Hood
- Microbiological System
- Microplate
- Microscopy
- Microtome
- Oximeter, In Vitro, Laboratory
- Photometric Microplate Readers
- Platelet Aggregation Analyzer
- Refractometer
- Refrigerator, Blood Bank
- Slide Stainer/Prep
- Spectrometer, Laboratory
- Spectrophotometer
- Thyroid Uptake System
- Tissue Processor
- Ultrasonic Cleaners
- Urine Analyzers
- Warming Cabinet
- Washer/Decontaminator
Centrifuge Forums
Hi,
Does anyone know what ERROR E31 MOTOR OVERTEMP means for the Sorvall Legend XT centrifuge. Bad brushes? Problem with the control board or a temperature probe? Any troubleshooting recommendations would be appreciated. Thanks.
Equipment: Sorvall Legend XT centrifuge
RE: Sorvall - Legend XT"Can't gain speed" error occurs after 2 minuets of run time. any solutions?
RE: Drucker Diagnostics - 642VESEquipment: Human Diagnostics - Humax 4K
RE: Human Diagnostics - Humax 4KDoes anyone know why it may trip the fuse after 3 seconds when power is connected
Hi,
Where can I purchase repair parts for Eppendorf centrifuges? Specifically 5810 5403
Thanks
Tim
Equipment: Eppendorf
RE: EPPENDORF - Centrifuge 5810 / 5810 REquipment: Thermo Fisher Scientific - Sorvall ST 8
RE: Thermo Fisher Scientific - Sorvall ST 8Equipment: Hettich - ROTO SILENTA 630 RS
RE: Hettich - ROTO SILENTA 630 RSHi
our machine has stopped working and displays the error e30
after looking through the manual, it says replace pcb, unfortunately, they are no longer made and the only ones i can find are in America from used machines.
i have 2 questions
1, do you think its worth sending the pcb off to a company that repairs pcbs to see if it can be fixed (i have asked a few near me but they dont work on centrifuges)
2, if so, is the pcb the same as the main board, on the schematics, it looks like it is but in the instructions, it refers to main board and pcb seperately.
many thanks and i appreciate any help
RE: Sorvall - Legend T/RT PlusUnit trips internal 4 amp breaker after 2-3 seconds. Any previous experience on this issue? Thanks
RE: Drucker Diagnostics - 853VESPower unit on, lid locks, 5 min light comes on SOLID, if I push any other buttons it beeps twice and lights go out and no other responses register. I see 5 min error code is when it’s Flashing right ?? For lid lock error? Maybe it’s not registering locked lid? But it is a solid light on 5 min. Thanks
Equipment: Iris International - StatSpin Express 4
RE: Iris International - StatSpin Express 4