- All Categories
- Patient Monitoring
- Apnea Monitor
- Blood Glucose Monitor
- Blood Pressure Monitor
- Carbon Dioxide Monitor
- Data Management Systems
- Electrocardiograph (EKG / ECG)
- Electroencephalograph (EEG)
- Electromyograph (EMG)
- Fetal Monitor
- Medical Gas Monitor
- Modules
- Multiple Medical Gas Monitor
- Oxygen Monitor
- Pacemaker
- Patient Cables and Leadwires
- Pulse Oximeter
- Sphygmomanometer
- Telemetry-Central Station
- Temperature Monitor
- Vital Signs/Multi-Parameter
Electrocardiograph (EKG / ECG) Forums
Hello-
We have two Mortara ELI250 EKG machines and one Biocare iE300. We have been told these units are too old by one of our sponsors(we are a clinical research facility) and we need to replace all three.
A) The Mortara ELI250 machine has all of the functions that we need. Are you able to suggest a comparable unit? The reports need to print ventricular rate, PR interval, QRS duration, QT/QTc, P-R-T axis, QTcB, average RR and QTcF.
B) We would be interested in a refurbished model as long as there is a certified refurbished certificate.
C) Do you have or are aware of any trade in or buy back programs?
I appreciate any insight you can provide!
Thank you-
Brandy Gagnon
Clinical Investigation Specialists
Equipment: Mortara - ELI 250
RE: Mortara - ELI 250I'm facing a problem mortara Eli 250 paper q fault I'm using original paper but fault is same need help
Equipment: Mortara - ELI 250
RE: Mortara - ELI 250The ECG is not registered by MAC-2000 at all. But the Acquisition Module Test passes fine (in Diagnostics menu). No other errors.
Before, the keyboard with display were replaced to new ones.
The SD-card is empty. Is the card significant (matters) for ECG registering?
How to recover the SD-card's content?
Can any one help and share his experience with this device?
RE: GE HealthCare - Mac 2000Hello, I have a MORTARA ELI150C, but I don't remember the password, I already looked for the BIOS battery to return to the factory settings but I can't find it, does anyone know how to restore the "admin" password?
RE: Mortara - ELI 150cHello, I have a MORTARA ELI150C, but I don't remember the password, I already looked for the BIOS battery to return to the factory settings but I can't find it, does anyone know how to restore the "admin" password?
RE: Mortara - ELI 150cI have a Quest Burdick system from 2007. Bought used. After 7 years of using it I started getting errors. First, after starting it up, it tells me “No video input. Please check cable”. I unplugged and re-plugged cables. After that “primary ide channel no 80 conductor cable installed”. I select f1. Then at the end I get the “quest starting up screen” where everything freezes. Treadmill does not move.
Equipment: Burdick - Quest
RE: Burdick - QuestI believe my CT8000i battery is not charging causing the machine to switch off when printing, I have seen replacements are quite cheap. However, I am not an engineer. But looking at the battery it seems fairly simple to replace. Could I replace it myself, easily, if I were to open the machine? Thanks all.
Equipment: SECA CT8000i
RE: Seca - ct8000i 2Have a mac 5500 that when unplugged from the wall immediately dies. Replaced battery, verified there is voltage at the transition cable. When unplugged the battery light flashes, battery indicator icon on screen shows empty. Before I get too deep Thought I'd ask for help
RE: GE HealthCare - MAC 5500HD