I saw on another post that it is the mag tray detect board. I cleaned it however it is still not working. Is this the correct part that is having issues?
Hello i have a boot error on my GE senographe essential unit. The operating system is solaris 10. Below is the error showing. Any free or Paid help to solve the issue will be appreciated.
I am facing the communication errors 0075 "Bus-Comp hardware failure" and 0077 "Bus-Coll hardware failure". It seems like a common failure, so I checked the communication cables: between the supervisor and Stereo PCBs, the cable between the Stereo and Collimator PCBs, the cable between the Stereo and Compressor PCBs, all three cables gave good continuity. The communication indicator LEDs (RXD, TXD) on the supervisor, Stereo and Compression PCBs are dimly lit, but on the Collimator PCB the LEDs are off. It appears that the Collimator PCB is bad, but the unit indicates two errors from two different devices (Collimator and Compression) as if it were a common problem on the Stereo or Supervisor cards. I really appreciate the help on this. Greetings.
Hello, the generator CPU 3V battery has gone bad and my unit has lost all its calibration info. I have mammocom program and computer, just need to know how to reload the calibrations. If any one could help me I would really appreciate it. Thank you.
