PET/CT Scanner Forums

0 Replies

Hi, Any one has an experience in error (X D5) for CT Hitachi Speedia,  Although generator and tube are working properly for HU calibration but error appears after starting warmup

This error XD5 appears after changing SCANTA pcb because of communication error ,Is there any relationship between changing SCANTA pcb and XD5 generator error 

Equipment: Hitachi Medical Systems - Supria

RE: Hitachi Medical Systems - Supria

1 Reply

Hello Sir,

I have some problem with (Hitachi Supria 16) .It did not allow to run and error code pop up everytime.

It says 'An abnormality has occurred in the scanner gantry'. 'Please shut the system down, and then restart." Error Code:00012844(S28(44)).

Can you please help me to solve that error?

Hope you reply me back soon.

Equipment: Hitachi Medical System - Supria 16 (Whole Body CT scanner)

Equipment: Hitachi Medical System - Supria 16 (Whole Body CT scanner)

RE: Hitachi Medical Systems - Supria

1 Reply

The hospital has a Hitachi Supria 128 CT scanner and the images in the sections show a defect in the form of concentric circles from the center at an equal distance from each other. It is especially visible in the phantom images, but is also noticeable in the tissue volume. What is this, why does it occur? The thickness of the section does not affect it.

Equipment: Hitachi Supria 128 CT

RE: Hitachi Medical Systems - Supria

0 Replies

hello does anyone have a hitachi supria 16 slice manual book?

RE: Hitachi Medical Systems - Supria

0 Replies

hello does anyone have a hitachi supria 16 slice manual book?

Equipment: Hitachi Medical Systems - Supria 16 slince

RE: Hitachi Medical Systems - Supria

0 Replies

Where can I see the zoom information in the console and how can I set or change the zoom?, lets say for a head and neck acquisition?

RE: GE HealthCare - Discovery PET/CT 600

0 Replies

After completing powerup sequence, turn key message appears on screen the the machine starts couch homing procedure, then starts separator homing and finishes successfully, CT and Table indicators on screen 1 turn green, but PET indicator stays RED.

Checked all the connection between the system components, workstations and servers, all are working fine.

Checked the link between PET Acquisition workstation and the PET gantry's card cage (VME Link) and it wss working fine.

Reinstalled the PET ACQ software successfully, but still PET indicator is RED and PRS utilities will not open.

So if any of the experts can teach us what are the main reasons that keeps PET indicator RED, we would appreciate it.

RE: Philips - Gemini TF 64

2 Replies

Anyone experience this and have a solution?

EKG will randomly cut out during scans. Replaced UPMM 3 times. Same issue. It will cut out mid scan won't come back up either afterwords. Reboot doesn't bring it up either. Have to do full UPMM reset procedure to get it back. Also tried new leads and trunk cables.

RE: Siemens - Biograph mCT

2 Replies

Having a wierd problem with a CIRS, will complete scout but ultimately fails stating Check resources from IRS ok Get ready from IRS failed [5]!!! Event: check resources failed stat=2009 " check resources failed for recon only step 3" Any help appreciated

Equipment: Philips Gemini PetCT

RE: Philips - Gemini 16

0 Replies

Hello. I am getting close Estop on my screen. Even if all the e stops are closed. The table does not get into home option. When we click the key, the sign goes away but it comes back and table does not move or go into home position

Equipment: Philips - Gemini TF 64 ( PET-CT)

RE: Philips - Gemini TF 64