- All Categories
- General
- Air Cleaners
- Alarm-Occupancy
- Analyzer Measurement & Simulator
- Apheresis Units
- Apps
- Audiometer
- Audiometric Booth
- Battery Testing
- Beds/Stretchers/Mattresses
- Blenders/Regulators/Flowmeters
- Brachytherapy System
- Continuous Positive Airway Pressure Unit (CPA)
- Dental Equipment
- Dictation System
- Electronystagmograph
- Enteral Feeding Pump
- Exam Tables & Chairs
- Facility Boom
- Hand/Foot Switch System
- Handpiece-Dental
- Headwall System
- Hemodialysis Unit
- Humidifier
- Hyperbaric Chamber
- Infant Incubators & Warmers
- Information System
- Infusion Pump
- Irrigation/Distention System
- Laser
- Lensometers
- Lift-Patient Transfer
- Light Source-Fiberoptic
- Lithotripter
- Medical Monitor
- Medication Management System
- Miscellaneous
- Nurse Call System
- Ophthalmic Equipment
- Oxygen Concentrator
- Patient Identification and Security System
- Peritoneal Dialysis Unit
- Phototherapy Unit (Hyperbilirubinemia)
- Point-of-Care Analyzer
- Pulmonary Function Analyzer
- Recorder
- Respirator-Air Purifying
- Scales
- Sequential Compression Device
- Slit Lamp
- Spirometer
- Sterilizers/Autoclaves
- Thermometer
- Traction Table
- Traction Unit
- Urodynamic Measurement System
- Ventilator
- Veterinary Equipment
- Vision Screener
- Warming Unit
- Warming/Cooling Unit
- Washer
- Wheelchairs
- Xenon System
Sterilizers/Autoclaves Forums
Equipment: Sterilizer Stern Weber 17
RE: Stern Weber - SW-17Equipment: Tuttnauer - 3870HSG D-Line
RE: Tuttnauer - 3870HSG D-LineRequesting where to start in where to start for this needle in a haystack repair. Any help or suggestions appreciated.
Equipment: STERIS - Amsco Century V116
RE: STERIS - Amsco Century V116Hi
Need help on Sm Century 400 with door unsealed alarm. Exhaust and steam manifold have been changed twice. CK1/2 and 14 also have been changed. PRV, door pressure switch also change and calibrated. After starting DART test not even 5 minutes after the seal got activated the error shows up door unsealed alarm. Im struggling to get it resolve and run out of option hence reaching out here for help.
Equipment: Amsco 400 small
RE: STERIS - Amsco 400 SmallPlease Can we Reset level1 and level 2 codes or use an Universal code because the changed codes are forgotton. Thanks
Equipment: CISA - 200
RE: CISA - 200My MOCOM Autoclave is giving A201 Error code during preheating Process
Equipment: MOCOM - B Classic
RE: MOCOM - B ClassicDear Pals, do you know how to reset UNIDENT autoclave? I made all maintenance but i couldn't cleen this alarm still(
In need of assistance in the sterilizers' repairs and maintenance please
Garba Hassan
RE: Astell - ASB 260 BT