- All Categories
- Laboratory
- Amino Acid Analyzer
- Automation System, Laboratory
- Bilirubinometer
- Biomedical Freezer
- Biotech/Life Science
- Blood Culture Analyzer
- Blood Gas/pH Analyzer
- Blood Grouping System
- Cell Processor
- Centrifuge
- Clinical Chemistry Analyzer
- Coagulation Analyzer
- Cryostat
- Cytometer, Flow
- Electrolyte Analyzers
- Electrolyte Analyzers
- Electrophoresis System
- Embedding Center
- Glycohemoglobin Analyzer
- Hematology Analyzer
- Histology Analyzer
- Histology Printer
- Immunoassay Systems
- Incubator, Laboratory
- Laminar Airflow Hood
- Microbiological System
- Microplate
- Microscopy
- Microtome
- Oximeter, In Vitro, Laboratory
- Photometric Microplate Readers
- Platelet Aggregation Analyzer
- Refractometer
- Refrigerator, Blood Bank
- Slide Stainer/Prep
- Spectrometer, Laboratory
- Spectrophotometer
- Thyroid Uptake System
- Tissue Processor
- Ultrasonic Cleaners
- Urine Analyzers
- Warming Cabinet
- Washer/Decontaminator
Tissue Processor Forums
Sakura VIP 6 AI tissue processor. Errors 321 and 324 are not listed in the service manual for the VIP 6 (I haven't seen a service manual for the "AI" version). It appears that these are new codes for the "AI" version of this processor. The description closely matches the description for errors 311 and 314. Does anyone know what the differences might be? Does anyone have a service manual for the VIP 6 AI?
RE: Sakura - TISSUE-TEK VIP 6Does anyone have the PM procedure & checklist for the newer AI version (VIP 6 AI)? From a service standpoint, it is quite similar to the original VIP 6, but there are a few differences.
RE: Sakura - TISSUE-TEK VIP 6Hi
I have a problem that the basket does not go down in the #12 position because it appears the W03 code error. Paraffin is melted and has the correct temperature to operate. I tried changing the jar of paraffin with another jar and the error was still there.
Hope someone can help me with this.
Thank you
Equipment: Leica TP 1020
RE: Leica Biosystems - TP1020Hi, everyone.
I'm trying to repair the screen of one of this units. I noted some lines on the board of the screen that was broken, so I fixed it and changed the fuse. The result is, the screen turn on and receives and show data, but it doesnt look good. I tried a few things but the result is the same. So I was wondering if this problem comes from the main pc board of the unit. Anyone can help?
RE: Sakura - Tissue-Tek VIP E300Hi
I'm using slee MTP tissue processor. My problem is that I cannt return it back to position 1. And it shows that there is a system error 15
Equipment: Slee Medical - MTP
RE: Slee Medical - MTPWe are processing around 90 cassettes daily. How often the charcoal pack have to be changed? TIA.
Equipment: Sakura - Tissue-Tek VIP 5 Jr
RE: Sakura - Tissue-Tek VIP 5I have TP1020 Leica Tissue processor with error E03; it has been just more than a year since installation. Please share the service manual with me. Thanks
Equipment: TP1020 leica Tissue processor
RE: Leica Biosystems - TP1020hi
this unit has "motion error z" and its z axis does not move normally just go in small space and that stop... as I check it Z Imax active when it move,and The axis is not locked and it moves easily by removing the motor
so Can anyone advise?
Equipment: Medite - TPC 15
RE: Medite - TPC 15