I have an MPI 1111 HUT and everything is working, but the table height. I can hear the column attempt to move up and down when I press the hand controller (leading me to believe it isn't the hand controller), but then there is no movement. Any ideas?
Does anyone have a source for the drawer slides or compatible drawer slides.
They look like something that would have been used in a low cost bathroom or kitchen cabinet, but I have yet to find anything the correct size at local building stores.
Despite Midmark EOL/EOS these in 2016, there certainly must be some vendor with the more standard parts like the slides available at reasonable cost.
Hi There,
I need the handle that hold backrest in position when its torqued down. its 3.75 in x 1 " has a set screw to tighten onto shaft.
Thank you. RE: Midmark - Ritter 104
Hello I would be great full to know what to do about backrest release lever not engaging to release backrest from upright position? Please assist me =¡=à RE: Midmark - Ritter 304
Hello,
Can anyone help me with the maintenance message reset procedure for Sirona C4+ Dental Chair?
I did not find any information about the reset procedure in any manual!
Thank You in advanced!
Dan RE: Sirona - Dental Chair C4
I am looking for FDA numbers on these tables. On top of the 510K there are device numbers that are issued to the manufacturer, but not usually publically. The problem is the FDA in all its wisdom requires this information be included on shipping documents when items are being sent back to the USA from places like Canada. They do not appear to be able to access their own records to confirm the device is approved even though it has been issued a 510K and is widely distributed in the USA. Sometimes these numbers are hidden in manual notes or other documents. If anyone can find a FDA issued Device Registration # for the SONESTA STILLE 6202 in their documentation, I would sure appreciate hearing what it is.
Thanks,
Bruce. RE: Stille-Sonesta - 6202
