Computed Radiography Forums

We upgraded our PC's operating system from WinXP to Windows 7.  Need available CS2 Software for our Regius 190.  Or do you recommend upgrading to CS7 as well?  Need Software.  Thank You

Equipment: Konica Minolta - Xpress CR- Regius 210

Hi there!
I've got a problem with this CR: it constatly shows me "Cassette insertion remove" error on display and do not work.

0) Yesterday operator called me and showed a problem: "Cassette insertion remove" error on display. I've tried to turn off/on machine, but after reset messege still exist. 
1) After some waiting and few turns on/off, moving transporting unit it at last showed ready status. 
2) We tried to make reading procedure: registring cassettes on CS3, insert first cassette, got result, but on isertion of second cassete got error "Improper insertion press eject". 
3) Pressing eject won't helped: insertion roller is moving, but elevator mechanism of transport unit don't. Holding eject button or pressing repeatedly do not help either.
4) I've opened front door, removed cassette by hand and closed a pannel. After this i've got "Cassette insertion remove" error. 
5) Turning off/on won't help. Rebooting a system through left pannel switch off/on do not help either: after turning on the system initialization begins and on first squares of progress i've got buzzer sound and "Cassette insertion remove" error on display. Transporting unit move and other procedurs does not activated: elevator of transport mechanism in lower position, like a cassette inserted, and shutter on isertion mechanism is open. Multiple reboots won't help, got same error on startup.

6) After waiting a night and tring to boot it started up normaly: full initialization, somthing moved inside, shutter closed lamp is light for a moment and got "Ready" status. Tried normal reading procedure and got in situation as above (1-5): succesfull reading of first cassette and "Improper insertion press eject" on second.

Had someone faced similiar situation? How do you managed it? Do you have any ideas on faulty mechanism? 
Probably you know how to get access to "dummy SCBZ program" which could be handy to test unit-by-unit testing and spoting a problem

Thanks!

Hi there!
I've got a problem with this CR: it constatly shows me "Cassette insertion remove" error on display and do not work.

0) Yesterday operator called me and showed a problem: "Cassette insertion remove" error on display. I've tried to turn off/on machine, but after reset messege still exist. 
1) After some waiting and few turns on/off, moving transporting unit it at last showed ready status. 
2) We tried to make reading procedure: registring cassettes on CS3, insert first cassette, got result, but on isertion of second cassete got error "Improper insertion press eject". 
3) Pressing eject won't helped: insertion roller is moving, but elevator mechanism of transport unit don't. Holding eject button or pressing repeatedly do not help either.
4) I've opened front door, removed cassette by hand and closed a pannel. After this i've got "Cassette insertion remove" error. 
5) Turning off/on won't help. Rebooting a system through left pannel switch off/on do not help either: after turning on the system initialization begins and on first squares of progress i've got buzzer sound and "Cassette insertion remove" error on display. Transporting unit move and other procedurs does not activated: elevator of transport mechanism in lower position, like a cassette inserted, and shutter on isertion mechanism is open. Multiple reboots won't help, got same error on startup.

6) After waiting a night and tring to boot it started up normaly: full initialization, somthing moved inside, shutter closed lamp is light for a moment and got "Ready" status. Tried normal reading procedure and got in situation as above (1-5): succesfull reading of first cassette and "Improper insertion press eject" on second.

Had someone faced similiar situation? How do you managed it? Do you have any ideas on faulty mechanism? 
Probably you know how to get access to "dummy SCBZ program" which could be handy to test unit-by-unit testing and spoting a problem

Thanks!

I have an IP stuck in the processor and cannot find a way to get it out.

Equipment: Fuji prima T2

the screen is all white and nothing is visible.

Equipment: Shimadzu-UD125P-C-PRO

The machine doesn't complete self test, hence leading to a bridge in communication between the digitizer and the workstation

Equipment: AGFA CR 30-Xm

Anyone can help with the solution of this error? Thanks

Equipment: AGFA CR10