Camera Forums

Added Sep 8 2026

0 Replies

Hi,

Anyone can help me to unlok color flow, dicom networking and image review in a HD3 Ultrassound?

System Key 8647-7308-1821-2867

Thanks, Pedro

Equipment: Ultrassopund HD3

RE: Mindray - HD3

Atualização

Updated Jun 26 2026

4 Replies

Olá tenho uma 4450 Fujinon que não funciona com a linha 530. Ela funciona somente com linha 450 e 590. Alguém sabe porque deste sintoma a linha 530

Equipment: EPX 4450 Fujinon

RE: Fujifilm - EPX-4450HD

Erreur 1

Updated Apr 5 2026

1 Reply

How made to repar the camera

Equipment: Camera sryker 1288

RE: Stryker - 1288 HD

Touchscreen on unit dont work

Updated Dec 3 2025

2 Replies

Richard Wolf - Logic HD touch screen on unit stopped working, any quick sollutions out there?

tried restart, with and without cam connected,

video works and button on cam can still does something i.e white balance.

RE: Richard Wolf - Logic HD

Olympus CV-180, freeze functions

Added Oct 16 2025

0 Replies

So the freeze function works from the keyboard, but not from the scope(GIF-H180). However this scope worked on another cv180. Could it simply be a user setting issue or something bigger?

RE: Olympus - Exera II CV-180

Repair of CV 180 and CLV 180

Added Aug 4 2025

0 Replies

The issue appears to be within the endoscopy tower unit itself, specifically the processor and light source.

Upon connecting the scope, we observed the following faults:

1. Excessive brightness – The camera light is extremely bright and does not auto-adjust. Manual adjustment is required to make the image viewable.

2. White balance malfunction – While the system confirms “White balance OK,” the image remains overly bright.

3. Iris brightness control – This function does not work.

4. Image distortion – Noticeable distortion was observed during twsting of the scopes.

For testing, we used both a 180 series colonoscope and gastroscope, and the issue persisted across both, ruling out the scopes themselves as the source of the fault.

Additionally, we thoroughly checked and cleaned all contact points to ensure there were no connection issues. Despite these efforts, the problem remained unresolved.

Equipment: CV180

RE: Olympus - Exera II CV-180

Error code 207 - Images Have Not Been Transferred

Updated Jul 7 2025

3 Replies

Hello - Every single time a physician captures a pictures during a procedure with a scope, the EVIS EXERA III (CV-190) processor sends an error message to the screen that says the following: "Images have not been transferred N207 Please transfer unsaved images now." Any ideas on how to fix this? I have searched the manuals and found nothing regarding this specific error code.

Equipment: EVIS EXERA III (CV-190)

RE: Olympus - EVIS EXERA III

4

Replies

Service mode

Updated Jun 12 2025

4 Replies

Does anyone know how to enter service mode on the CV-190? I figure there is a default ID and pw but I can't find it. I need to access the white dot correction menu. Thanks.

RE: Olympus - CV-190

0

Replies

Display issues

Added May 21 2025

0 Replies

Stryker - WiSe HDTV Transmitter and Receiver

Hello dear? In our laboratory, we use MSH-20D Digital Hotplates Stirrers from WiseStir. Two of them have such issues: When turn on, the display turns off slowly after about 1 minute. Please find me a solution and/ or share the service manual with me.

Equipment: MSH-20D

RE: Stryker - WiSe HDTV Transmitter and Receiver