Ultrasound Forums

My Chison ECO 1 is just displaying "Lease has expired" immediately upon switching it on.

What could be the problem?

How can I rectify the problem? 

Equipment: CHISON ECO 1

This unit ( Siemens Sonoline G40) boots up but then comes up with error message "Imaging Initialization failed. System shutting down." Would anyone have an idea as to how to track the problem down or fix the problem???? Thanks for your help

I am experiencing trouble with my Sonosite M.Turbo device as the password I entered is not working. Despite contacting Sonosite support and receiving a temporary password, it also did not work. They informed me that the Date & Time being out of sync could be causing the issue, but I am unable to access the settings to correct this in guest mode. Sonosite suggested replacing the PCB board for 7.5k, however, I believe a simple solution would be to upload a new image on an SD card. Unfortunately, I have been unable to locate the specific image for the M.Turbo model; although there is one available for Titan software which isn't ideal for my needs.

I have an Ultrasound MyLab 30, the device does not turn on and the power indicator does not light up either from the power cable or from the battery.
I checked this, all voltages in the power supply are ok, only -1.8V on the power LED, no voltage detected on all other pins of the two flat cables.
Is it the motherboard that's faulty or the keyboard problem?
if anyone can help please?

Hello, May you kindly assist me on where to find language settings on Toshiba Aplio ssa 790a.unfortunately the user manual is in German language 

I have Philips HD5 ultrasound

When I open it the transducer is readable but nothing is imaged

how to fix corrupted files when sending to PACS 

My Siemens sonoline g40 keeps shutting down.

Writes "system shutting down to prevent permanent damage".

What can be the cause and what is the solution.

Thanks

Equipment: Siemens sonoline g40

How can I reverse a system update? 

updated the ultrasound system by installing a new transducer but I have not been able to purchase the license for the system update. Can you help me with any suggestions?

Hello everyone who needs help with software and backup Logiq V2, I will help, write to email

I have

m.serviceko@gmail.com