Panoramic Radiography Forums
Is there a way to adjust the temple rest motor time out. I have had to disable the temple rest in order to avoid these errors. Also how does on access the temple rest motor? There are 4 screws but the chin rest assemble prevents the cover removal.
Thank you in advance
RE: Planmeca - Proline PM 200203/04/24
Dear Belmont X-ray Tech. Support,
Please advise if you have available a Wiring Diagram or Troubleshooting Manual for the Belmont 071-A Control Box either on Paper or for Download,
Sincerely,
Robert Herreria, Technician
E.C.D. Services, Inc.
rvhpb@juno.com
(305)763-6754
Equipment: Belmont Acuray 071-A
RE: Takara Belmont - 071-AFacing this problem in my soredex cranex novus, E10 and E12
Thanks in advamce
Equipment: Soredex - CRANEX® Novus
RE: Soredex - CRANEX® NovusHallo, WE are having the same problem by one of our customer in Italy, how did you solved it back then?
RE: Gendex - Orthoralix 9200 DDE DentalHave a CranexD that is an older model using a PCI card in a computer. Computer is dying and need to upgrade the PCI Fiber card to a newer one using PCIe. Part number is 0.805.5084
Do you have them in stock and what's the cost.
Equipment: Soredex - CRANEX® D
RE: Soredex - CRANEX® DEquipment: intraoral-planmeca
RE: Planmeca - Proline XCMy Gendex Orthoalix 8500 DE PAN machine shows dE error & head will not advance. Henry Schein rep stated the manufacture no longer supports it & can't provide me with part number to fix problem. He wants me to buy a new PANO. PLEASE HELP!
Equipment: KaVo - Gendex Orthoralix 8500 DE PAN machine
RE: KaVo - Gendex Orthoralix 8500I have a cranex excel d - the thing is that the machine come on but unable to get into ready position to take an exposure . Also unable to lift or drop the machine with the height adjustment .
the may have been contact with a damaged exposure switch when switching on the machine.
However no buzzers or fault lights are found.
How could i remedy this and trouble shoot it .
I was told to check the fuses which are all OK and TA swutch is in down position.
Any ideas where to from here ??
RE: Soredex - CRANEX® DHello,
I have Philips C-Arm BV-25 Gold Device
when they try to start the device at the starting screen it becomes like DOS screen and it shows error at top left (Alarm index: 081) and at bottom left (Alarm: not ready)
I believe that the device might needs installation of new Software. So if anyone has the software installation or Hard-Disk image kindly let me know and contact me
Thank you
RE: Philips - BV-25