I have a TPS 5100-1 version 3.3 console. The maximum rpm I get when I attach the universal driver is 1500 but in the manual it shows upto 75000. Also the ream rpm is set at 600. So is it the same in all tps system or can the rpm be increased for the universal drive in drill mode and ream mode . I do get 75000 in the saw mode RE: Stryker - TPS
My machine working properly only touch break I ordered new touch before I change machine goes down now not working no LED SIGNALS but voltage comes every wear . What is the prob RE: Stryker - 5400-50 CORE Console
La tarjeta de control falla, la bomba no irradia correctamente , se mantiene continuamente irradiando. Anteriormente le cambie el sensor de presión a un modelo parecido y se corrigió el problema, actualmente el equipo en donde detecte el problema, el sensor de presión no es el problema. Es un modelo ar-6400
I have bought recently reamers of the Bixcut Fixed-Head System - AO Fitting . Unfortunately, those reamers do not fit the chuck from system 6. Would the 4100-210 Stryker AO Large Reamer be a solution for this problem? Thank you. RE: Stryker - Cordless Driver 3
