Does anyone know if there is a PM schedule on these Philips SPO2 modules, M1020B? If so, does anyone have service documentation I can present to my boss for it?
Is there a solution to a very loud flapper motor? running M3015A DE435 model, the motor functions, Flow rate are spot on, calibrates to Spec, but very loud motor as compared to other modules.
any solutions besides replacing motor? Can I coat the internal flappers or motor rubber membrane with silicone lube?
I would greatly appreciate insight as well. Like what causes a loud flapper motor, or is it really the flappers that are causing this. etc
GE PDM. Question, if anybody know the purpose of components inside the Top Casing of a PDM that connects a 10 pin to the center of the Mainboard? Externally, it appears that something glides/attaches to the top side of the Module with GE logo, there are two Ports that engages. 3rd party Top covers omits this feature of course.
Nothing in the manual and nothing online that I could find. RE: GE HealthCare - PDM Carescape Masimo
Good morning,
I wonder if M3001A MMS module with serial number prefix DE907 is compatible with an IntelliVue MP70 monitor hardware revision B.00.18 and software revision M.03.03. Current compatibility matrix charts I've found don't list the M software revision which is the reason I'm asking here.
Thanks,
Jack
Hi, I am new to CO2 MMS. Can you give me suggestions where a vacuum leak might commonly be? I believe its in the soleniod, is it repairable/refurbishable? I've taken apart the solenoid and pulled/extended the spring to give more tension to rest on the valve? Didn't help.
I've check all other seals and o-ring but they seem okay. My tester is good and the hoses hook up directly to the assembly. RE: Philips - M3015A CO2 MMS Module
