Surgical Laser Forums

0 Replies

Does anyone know what version of Windows operating system is installed on the Cynosure Sculpsure? Thank you in advance.

RE: Cynosure - SculpSure
Updated  May 30 2021
1 Reply

Please let me know if anyone has a manual to share

RE: Alma Lasers - PicoClear
Added  May 30 2021
0 Replies

Hello I have a problem in this laser "power supply error, code 901" I checked the device and almost every thing works well except the q switch, it does not receive the power it needs. Could you help , please . Thank you

RE: Asclepion - TattooStar R
Updated  May 29 2021
6 Replies

Hi, At first I had the laser connected to a 220V step up transformer, but sometimes it would turn off due to the step up transformer not having enough power for the laser, but sometimes it would stay on and go through the screens with no issues, but I decided not to run the laser until we hook it up to a True 220v line that we were thinking of hooking up to. So the issue that I am having now is that, after adding the distilled water to the reservoir due to low level of water, I turned on the machine, and now I'm getting a red screen with a message that says "Casesaver Feature activated" so I clicked continue and it went to the laser control screen, but with limited power. So I decided to run the true 220V line to our basement to run the machine directly to a 220V line, but when I turned it on, that "Savecase feature mode" is till popping up. Does anyone know how to disable that "savecase feature mode" ?

RE: Lumenis - VersaPulse PowerSuite 80/100W
Updated  Apr 9 2021
1 Reply

The manual suggests that there is a disconnect somewhere between the foot press and shutter. Anyone work past this issue? We were helpfully told to "ensure the press was used firmly"...

RE: Lumenis - NovaPulse
0 Replies

What is Error 06? Does somebody have a service manual of the merilas 532a?

RE: Meridian - Merilas 532a
0 Replies

Hello, I need to know what is the temporal separation between pulses for the burst mode train of pulses. Thank you Luis

RE: Coherent - 7970
Added  Feb 26 2021
0 Replies

Need Clinical Guidelines for both handpieces for US customers

RE: Cutera - Excel V
Added  Feb 21 2021
0 Replies

Error - Flow switch off . I noticed the 2 fans are not turning?

RE: Alma Lasers - Accent Family

Ask a Question

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Please review our Privacy Policy for more details.
I Agree