Covidien - PM10N
Covidien PM10N Forums
Add Pulse Oximeter to My Bench9 Results
Updated Dec 16 2022
1 ReplyAnyone know how I can fix the error code 010? Please post if you do, Thank you! RE: Covidien - PM10N
Updated Mar 22 2022
1 ReplyDear Colleagues:
I replaced the coin cell in a PM10N , Them some data has been erased like a Serial number.
Any idea how to resolve this problem?
Thank You
RE: Covidien - PM10N
Updated Mar 8 2022
1 ReplyHello, I have an oximeter PM10N Covidien and I need the service password, I have the manual but it doen´t says the password. Can anybody provide it? Thanks :) RE: Covidien - PM10N
Updated Feb 17 2022
9 RepliesHello,
I am having some trouble getting a Covidien PM10N to work.
I am using the DS-100A sensor.
When I connect the sensor and turn the device on, I can see that the sensor briefly turns on, blinks once and then turns off and never comes back on again.
Additionally, I get error code 276 on the screen, which I know means:
"back end reports sensor read failure". But the sensor is confirmed to be working, so I don't know where to start diagnosing. May it be a wrong sensor causing the problem?
Thanks in advance. RE: Covidien - PM10N
Updated Dec 7 2021
Updated Aug 4 2021
6 RepliesThe equipment turns on and will sporadically read but it continues to flash with System Failure (907) on top. RE: Covidien - PM10N
Updated May 23 2021
1 ReplyError message 910 after turning it on. We're not able to get it to measure anything at all.
How do we troubleshoot or fix it.
(Batteries are fresh and working.) RE: Covidien - PM10N
Updated Mar 2 2021
Updated Jul 8 2020
3 RepliesAnyone have the service passcode for the Covidien/Nellcor PM10N. I need to change the date/time and cannot with out the password. And yes, I know I can call tech support and will if I don't get a quick answer here. Thanks. RE: Covidien - PM10N