GE HealthCare - LOGIQ E9
GE HealthCare LOGIQ E9 Forums
Add Ultrasound Systems to My Bench61 Results
Updated May 10 2019
Updated Nov 17 2018
2 RepliesWith my convex probe elastography works perfectly and it is regularly actioned by pressing the Elasto button, which turns from red to green. On the other hand, if I press the same button while using the linear probe (ML6-15) it says that the elastography mode is not available with that probe. Why?! On the official site I saw many shear wave elastography images taken with the linear probe! RE: GE HealthCare - LOGIQ E9
Updated Oct 27 2018
1 ReplyHow do I put in the settings for auto trace so I can get the RI and PI for umbilical dopplers? RE: GE HealthCare - LOGIQ E9
Updated Oct 27 2018
1 ReplyHow do you upload scan assist from a CD made from another Logiq E9? I go to utility, then upload, but how do I upload the scan assist? RE: GE HealthCare - LOGIQ E9
Updated Oct 25 2018
4 RepliesGood day fellow engineers. I have a GE Logiq E9 SW 2.0.5 that when booting up has a constant audible thumping noise coming from the speakers. At times it doesn't do it when booting up. At times it does do it when booting up but goes away once the system has completed booting up all the way. However, the customer has informed me that sometimes the audible thumping noise does not go away once after booting up and they have had to do their study with the system making the thumping noise thru the speakers of the system. Any ideas out there? I can be reached at hermhc1961@gmail.com or 303.968.4844 as well. Or a reply here would be great. Hope I can return the favors to you all. RE: GE HealthCare - LOGIQ E9
Updated Oct 2 2018
2 RepliesI had to reinstall the base software and now after the systems starts booting up it gets stuck on GRUB.
Is stuck here:
Verifying DMI Pool Data........
Boot from CD:
GRUB RE: GE HealthCare - LOGIQ E9
Updated May 7 2018
2 RepliesCan these ultrasound devices be configured for domain based or active directory login? RE: GE HealthCare - LOGIQ E9
Updated Mar 9 2018
2 RepliesWhen i used protocol SWE for renal, it looks that the Field of View doesn' t fill full..what is the problem?? Does it need specific software? RE: GE HealthCare - LOGIQ E9
Updated Feb 6 2018
3 RepliesI'm getting fan control error 254 several times a day in the error log. Main fans are okay. GFI fan test passes. Temperature test passes. Filters are clean. RE: GE HealthCare - LOGIQ E9
Updated Jan 15 2018
3 Replies. I was working with two Logiq E9(System #1 s/n:98214US0 Year:2009, Software Version:R2.0.3. System #2 s/n:105945US0 Year:2011, software version R3.0.1. The customer told me that have some issues with the Endo Probe. The probe was working on both system but then just can be used only in the System#1. Yesterday I replaced the Main Power supply to the System #1 because was defective but when the tech tried to connect the probe the system show a error message(Error: reboot the system. The MPS replacement could be cause the probe malfunction? Also have 2 probe more and both is working, just the Endo probe does not working. I ran all diagnostic and I dont found any fault in the diagnotic, all passed. This error could be a system issues or Front End Issues? RE: GE HealthCare - LOGIQ E9