Hello, just took an exposure on Siemens Cios Select and saw an error on the monitor: ERR 5211/80 and on the C-arm: ERR 10. The image of the exposure is grainy. How to diagnose and remedy this?
When switched on the workstation for the c arm fails to boot properly.at times after restating the machine both the workstation and generator it works but in most cases it doesn't start( workstation) the UPS is fine and working okay.
I'm getting an error code on a Siemens Cios Select. It’s still taking images, but after each image, it is showing “err 10” on the base of the c-arm where it normally displays the angle and p/s. Any ideas?
So my cios select normaly i would turn on arc button and monitors and pc should start on, now i have to take off the front and start the ups to turn on but only happens when the ups is off
buenas tardes necesito cambiar de monitor el vivo por el referencia. pero el equipo reconoce al mismo a pesar de cambiar los cables y monitor. algun consejo de como hacerlo?
Hello, We have a Cios Select c-arm. It restarts randomly sometimes after 5 or 30 or 15 minutes and sometimes it works hours without restarts. We cant work with it as is. Any idea about this problem? RE: Siemens - Cios Select
i have the IP of MCU and Camera XCS is 169.X.X.X, so NO DHCP server is working an error is showing in the monitor
"Image chain Error
XCS Communication Error
System not REady
Radiation is not possible due to system problems " RE: Siemens - Cios Select
Hi everybody, I change the battery bios in the computer of C Arm Siemens Cios and when I press F2 for entry in bios setup, the sistem ask a password. someone can help me??
regard
Giuseppe RE: Siemens - Cios Select
