Siemens Sonoline G50 Forums

my device G50 can not be shutdown properly just by swichoff electercity

hi dear in charge:

    my device Siemens G50  device can not be shutdown properly and need to swich off the electrical cycle each times...please i need your help to solve this problem...with regards

hi dear in charge:

    my device Siemens G50  device can not be shutdown properly and need to swich off the electrical cycle each times...please i need your help to solve this problem...with regards

I NEED SERVICE PASSWORD .

I need the service password.

Hi,my G50's monitor is broken,and it is hard to find the one,so do any way to use other model monitor to instead? Thank you,

We have a Siemens Sonoline G50 in our hospital, it doesnt power up. The cord and outlet are working. There was a power surge earlier this week and since then it has not been able to turn on. Any help would be appreciated. Thank you

No is good imagen

Checked and found monitor not working. can any one supply me the monitor for sonoline g50 ultrasound unit. Model number 1P7475101.

Hello!

We have a bad image (vertical stripes). 4 vertical stripes, which are repeated: x0x0x0x000000000x0x0x0x000000000x0x0x0x0 ..... When Freeze on, there is no picture at all - only artefacts. If the unit stay 10 minutes at Freeze, appear also horizontal stripes and many artefacts at realtime image. Horizontal stripes disappear after reboot.

External examination revealed nothing.  All voltages are normal. Indication of the power supply is normal. No pulsation. The fault is on both sockets. What part could be faulty?

Siemens Sonoline G50, Model 7474922, without DIMAQ-IP.

Image:

Image at Freeze:

Image after 10 min Freeze:

Image after 10 min Freeze: