Buen día. Estoy reparando este equipo el cual indica 960mbars a presión admosférica y necesito ajustarlo. Quizás por esto me da algunos errores relacionados al vacio final.
Modelo: 487AGP
Serial: 702519
Firmware: PR5.4
Necesito Master Code para calibración de sensor de presión Agradecería me puedan ayudar. Muchas gracias
Translation:
Hello. I am repairing this unit, which reads 960 mbar at atmospheric pressure, and I need to adjust it. This may be the cause of some errors I am getting regarding the ultimate vacuum.
Model: 487AGP
Serial: 702519
Firmware: PR5.4
I need the Master Code for pressure sensor calibration. I would appreciate your help. Thank you very much.
Hi everybody, I have a problem withe printer for this sterilizer. The printer sometimes works sometimes doesn't... I try to buy it with PartsSource, because in their site shows that they sell it, but they don't. Someone knows how to find the assembly, the printer or the board? Who is the manufacturer or some advice? Thanks in advance for your help. RE: 3M Health Care - Steri-Vac 5XL
The sterilizer was for about 2 hours in aeration mode when its compressor stopped working. The sterilizer hung-up and girls turned it off. When I got to it, the display showed E71 and C3 errors. It was no response to either button. Does anybody know how to switch the sterilizer back into standby mode?
Thanks a million, George. RE: 3M Health Care - Steri-Vac 5XL
I hope all of you are doing well. I have 3M steri-vac 5XL machine. It is showing E8 and E6 errors. Please guide me what should I do?
Thanks RE: 3M Health Care - Steri-Vac 5XL
hi i have service manual for 5XL & 8 XL.
i have Error E73 i need help to solve this problem.
they said on service manual , vacuum sensor problem.
. RE: 3M Health Care - Steri-Vac 5XL
