Stryker Prime X Forums

1 Reply

Im having trouble. My stretcher slants to the left I'm not extremely familiar with these stretchers and haven't been able to fix this it will move up and down and sits up with no issue but the foot side is stuck tilted 

RE: Stryker - Prime X

1 Reply

Replaced the patient right side rail assembly. Trying to re-calibrate the scale. Scale will show zero's and then go to Error Code LC. Service manual doesn't have any detail on how to trouble shoot that error code. If anyone has come across this issue and could help me out on how to trouble shoot the issue to be able to calibrate the scale. I would truly appreciate the help.

Thank you!

RE: Stryker - Prime X

3 Replies

Does anyone know if the base label (big long grey label along the sides) is a spare part and what part number this is? It isnt in any of Strykers service manuals. Thanks Mike

RE: Stryker - Prime X

1 Reply

Why the scale reading are big different (more than 4%) when weighting at the lowest position and the higher position for the stretcher. The reading is more accurate at the higher position. I cannot find any "reminder or Precautions" in the operation manual. Thanks for your reply.

RE: Stryker - Prime X

4 Replies

the weight reading is big different when sit on head side( 84kg) and foot side (90kg). We have re-calibrate the scale, but no improvement. How can I do?

RE: Stryker - Prime X

0 Replies

Preventative maintenance should be performed at a minimum of annually. A preventative maintenance program should be established for all Stryker Medical equipment. Preventative maintenance may need to be performed more frequently based on the usage level of the product. CHECKLIST _____ All fasteners secure _____ Siderails move and latch properly _____ All casters lock with brake pedal engaged _____ All casters secure and swivel properly _____ Inspect each caster and remove any wax or debris which may have collected on the caster or braking mechanism _____ Steer function working properly _____ Fowler operates and latches properly _____ Gatch operating properly (Optional equipment) _____ Trendelenburg/reverse Trendelenburg operates properly _____ Ground chain intact _____ No leaks at hydraulic connections _____ Hydraulic jacks holding properly _____ Hydraulic oil level sufficient _____ Lubricate where required _____ Body restraints working properly _____ I.V. pole intact and operates properly _____ Oxygen bottle holder intact and operates properly _____ No rips or cracks in mattress cover _____ Accessories and mounting hardware in good condition and working properly _____ No excessive play in the drive handles _____ Press the handle switches - unit should not move unless the handles are pushed forward or pulled back _____ Press the handle switches - move the handles forward and back and verify the unit responds properly _____ Confirm battery powered functionality _____ No cables worn, pinched or frayed _____ Power cord and plug are free of damage _____ All electrical connections tight _____ All grounds secure to the frame _____ Ground impedance not more than 200 m© (milliohms) max: Test point(s) include electronics enclosure and motor chassis mounted to base of unit _____ Current leakage not more than 300 ¼A (microamps) (per UL 60601-1) _____ Batteries sufficiently charged (Optional scale system) _____ Display housing intact and not damaged (Optional scale system) _____ Load cells intact and not damaged (Optional scale system) _____ Scale calibrated properly. Recalibrate, if necessary (Optional scale system)

RE: Stryker - Prime X

5 Replies

RE: Stryker - Prime X

3 Replies

Where is the battery on this stretcher, what battery is used, and how do I change it?

RE: Stryker - Prime X

1 Reply

how do you calibrate the scale

 

RE: Stryker - Prime X

0 Replies

Greetings Group

Experiencing difficulty with the rechargeable lithium ion battery system for the scale and chapperone system as well.

Any diagrams or breakdown of parts would be helpful.

Happy Thanksgiving

Grant

RE: Stryker - Prime X