Siemens - Siremobil ISO-C
Siemens Siremobil ISO-C Forums
Physicists found my Litho unit has a Hi Contrast resolution issue. Here's the following found by physicist : Minimum Resolution = 2lp/mm x (15cm/(FOV in cm))
1) 18cm FOV requires 1.7lp/mm - UMP observed 1.4lp/mm ***( I can verify 1.5lp/mm with a Gammex LinePair Phantom)
2) 12cm FOV requires 2.5lp/mm - UMP observed 2.0lp/mm ***( I can verify 2.1lp/mm with a Gammex Linepair Phantom)
What can I adjust or will have to replace a part? I have no service manuals for this unit. Thanks for any help.
Jere
RE: Siemens - Siremobil ISO-CHospital Albert Schweitzer Hait, we have a Siremobil ISO -C 3 D ,we have a problem when shoting at the low end 55KV and when we shoot at 65KV the resoultion is a lot better. we are in the mountains in Haiti, where do we start when troulbshooting this problem?
RE: Siemens - Siremobil ISO-CHello, can anyone respond with what this specific error code is about?
Thx!
RE: Siemens - Siremobil ISO-C
I am getting Error codes 7202, 7208, 7150 and 7308.
Can some one help the source of this issue ?
RE: Siemens - Siremobil ISO-C